DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement

Giriş

Follow this guide to replace the charging assembly in your DualShock 4 model CUH-ZCT1U controller.

The charging assembly includes the light bar LED and micro-USB charging port. Use this guide to replace and fix a faulty light bar or broken charging port.

Neye ihtiyacın var

Adım 1 Check your controller model

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Check your controller model: adım 1, 1 resimden 1.

Check the model number on the back of your controller. This guide was written using model CUH-ZCT1U. If you have another model, the guide procedure and replacement parts may differ slightly.
If you have the second generation DualShock 4, model CUH-ZCT2U, use these guides.

Düzenle

Adım 2 Unfasten the rear case

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Unfasten the rear case: adım 2, 2 resimden 1.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Unfasten the rear case: adım 2, 2 resimden 2.

Bu adımda kullanılan alet:

Microfiber Cleaning Cloths

$3.99

Satın Al

If you need to stabilize your controller during this repair, lay it on a soft surface such as a microfiber cloth.
Use a Phillips screwdriver to remove the four 6.4 mm-long screws securing the rear case.

Düzenle

Adım 3 Remove the L1 button

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the L1 button: adım 3, 3 resimden 1.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the L1 button: adım 3, 3 resimden 2.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the L1 button: adım 3, 3 resimden 3.

Use an opening pick to pry each corner of the L1 button from the front case.
Cover the button to prevent it from ejecting out of your workspace.
Remove the button.

Düzenle

Adım 4 Remove the R1 button

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the R1 button: adım 4, 1 resimden 1.

Use your opening pick to pry and remove the R1 button, just as you did for the L1 button.

Düzenle

Adım 5 Unclip the rear case

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Unclip the rear case: adım 5, 3 resimden 1.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Unclip the rear case: adım 5, 3 resimden 2.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Unclip the rear case: adım 5, 3 resimden 3.

Six plastic clips secure the rear case to the front case. The next four steps demonstrate how to release these clips before you can open the controller.
Insert your opening pick at a downward angle between the front case and rear case, halfway between the handle and the action buttons.
Slide your pick toward the handle and pry up to release the first clip.
Repeat this procedure on the other side of the controller to release the second clip.

Düzenle

Adım 6

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement: adım 6, 3 resimden 3.

Two more clips secure the rear case near the extension port and the headphone jack.
Insert your opening pick between the front case and rear case at either side of the ports.
Twist your pick to unclip this section of the rear case from the front case.
If the rear case feels stuck, insert and twist your pick from different angles.
Don't open the controller yet, as it's still held together by two very delicate clips near the triggers.

Düzenle

Adım 7

The final two clips are very delicate, and must be disengaged from inside the controller. If you break them, don't worry—it won't affect this repair or your controllers functionality.
Locate the clips by looking through the gap above the R2 or L2 buttons.

Düzenle

Adım 8

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement: adım 8, 3 resimden 3.

Insert the point of a spudger through the gap above the R2 button and push the retaining clip outward.
While pushing the clip outward, slowly pull the rear case away from the front case until you feel them separate.
Don't fully open the controller until each of the R2 and L2 clips have been disengaged.
Repeat this procedure for the clip near the L2 button.

Düzenle

Adım 9 Remove the rear case

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the rear case: adım 9, 3 resimden 1.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the rear case: adım 9, 3 resimden 2.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the rear case: adım 9, 3 resimden 3.

Press the R2 button and slide the rear case over it.

Düzenle

Adım 10

Press the L2 button and slide the rear case over it.

Düzenle

Adım 11

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement: adım 11, 3 resimden 3.

Flip the rear case over the top of the controller and lay it down, being careful not to strain the interconnect cable.

Düzenle

Adım 12 Disconnect the interconnect cable

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Disconnect the interconnect cable: adım 12, 3 resimden 1.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Disconnect the interconnect cable: adım 12, 3 resimden 2.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Disconnect the interconnect cable: adım 12, 3 resimden 3.

Use tweezers or your fingers to remove the interconnect cable by pulling its blue pull tab straight out of the socket.
During reassembly, reconnect the cable with its blue pull tab facing the outside of the controller.

Düzenle

Adım 13 Unfasten the light guide bracket

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Unfasten the light guide bracket: adım 13, 1 resimden 1.

Use your Phillips screwdriver to remove the two 6.4 mm screws securing the light guide bracket to the rear case.

Düzenle

Adım 14 Remove the light bar bracket

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the light bar bracket: adım 14, 3 resimden 1.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the light bar bracket: adım 14, 3 resimden 2.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the light bar bracket: adım 14, 3 resimden 3.

Remove the black spacer and white bracket from the light guide.

Düzenle

Adım 15 Peel the foam pads

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Peel the foam pads: adım 15, 3 resimden 1.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Peel the foam pads: adım 15, 3 resimden 2.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Peel the foam pads: adım 15, 3 resimden 3.

Peel both foam pads from the light guide.

Düzenle

Adım 16 Remove the light guide

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the light guide: adım 16, 3 resimden 1.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the light guide: adım 16, 3 resimden 2.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the light guide: adım 16, 3 resimden 3.

Grab and lift the light guide from its alignment pegs on the rear case.
Remove the light guide.

Düzenle

Adım 17 Remove the light diffuser

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the light diffuser: adım 17, 3 resimden 1.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the light diffuser: adım 17, 3 resimden 2.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the light diffuser: adım 17, 3 resimden 3.

Push the light diffuser through the inside of the rear case and remove it.

Düzenle

Adım 18 Unfasten the charging assembly

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Unfasten the charging assembly: adım 18, 1 resimden 1.

Use your Phillips screwdriver to remove the two 4.6 mm screws securing the charging assembly to the rear case.

Düzenle

Adım 19 Remove the charging assembly

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the charging assembly: adım 19, 3 resimden 1.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the charging assembly: adım 19, 3 resimden 2.

DualShock 4 (CUH-ZCT1U) Charging Assembly Replacement, Remove the charging assembly: adım 19, 3 resimden 3.

Grab and lift the charging assembly from its alignment pegs on the rear case.
Remove the charging assembly.

Düzenle

Sonuç

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

3 farklı kişi bu kılavuzu tamamladı.