Ana içeriğe geç

Giriş

If your Eurobike X1 Mountain Bike’s handlebar is loose, damaged or in need of replacement, this guide will show you how to replace the handlebar.

Aletler

Parçalar

Hiçbir parça belirtilmedi.

  1. Use a 5mm Allen wrench to unscrew the brakes. Use a 5mm Allen wrench to unscrew the brakes.
    • Use a 5mm Allen wrench to unscrew the brakes.

  2. Unscrew the stem-bolts using a 4mm Allen wrench and remove the faceplate and handlebar from the stem (hold the handlebar as this step is done). Unscrew the stem-bolts using a 4mm Allen wrench and remove the faceplate and handlebar from the stem (hold the handlebar as this step is done).
    • Unscrew the stem-bolts using a 4mm Allen wrench and remove the faceplate and handlebar from the stem (hold the handlebar as this step is done).

  3. Clean the faceplate cover with a cloth.
    • Clean the faceplate cover with a cloth.

  4. Replace the faceplate with the bar on the stem, and screw down the bolts evenly using a 4mm Allen wrench.
    • Replace the faceplate with the bar on the stem, and screw down the bolts evenly using a 4mm Allen wrench.

  5. Reinstall the handlebar controls (breaks & handle grips). Reinstall the handlebar controls (breaks & handle grips).
    • Reinstall the handlebar controls (breaks & handle grips).

Bitiş Çizgisi

Guled Omar

Üyelik tarihi: 10-09-2021

121 İtibar

1 Kılavuz yazıldı

Takım

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 13

Her zaman: 145