1. Disconnect the DC 6V IN power cable from the device.
    • Disconnect the DC 6V IN power cable from the device.

    • Remove the 3 front panel screws on the bottom of the device.

  2. Carefully pry off the front panel of the device to reveal the button in need of replacement.
    • Carefully pry off the front panel of the device to reveal the button in need of replacement.

  3. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Pull firmly on the button in need of replacement to free it from its housing. Pull firmly on the button in need of replacement to free it from its housing.
    • Pull firmly on the button in need of replacement to free it from its housing.

  5. Push the replacement button into its new housing.
    • Push the replacement button into its new housing.

  6. Snap the front panel back into place and re-insert the 3 front panel screws, completing the replacement.
    • Snap the front panel back into place and re-insert the 3 front panel screws, completing the replacement.

Sonuç

The system selector button should now be working properly.

Bir başkası bu kılavuzu tamamladı.

Jared

Üyelik tarihi: 28-10-2013

201 İtibar

2 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 4

Her zaman: 260