Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

The cooling assembly is made up of a cooling fan and a large piece of copper to help dissipate heat out of the bottom of your laptop. Over time, the fan can wear out and it will need to be replaced.

Parçalar

Hiçbir parça belirtilmedi.

  1. Loosen the seven 6 mm Phillips #0 screws on the back of the case. Leave all the screws in the back plate and so you don't lose them.
    • Loosen the seven 6 mm Phillips #0 screws on the back of the case.

    • Leave all the screws in the back plate and so you don't lose them.

  2. Pull upwards on the top of the back cover to remove it. Pull upwards on the top of the back cover to remove it.
    • Pull upwards on the top of the back cover to remove it.

  3. Nintendo Switch Setleri

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Setleri

    A quick fix to get back in the game

    Shop Switch Kits
  4. Remove the four 9 mm Phillips #0 screws from the cooling assembly.
    • Remove the four 9 mm Phillips #0 screws from the cooling assembly.

  5. Gently and carefully remove the cooling assembly to avoid ripping the wire attaching it to the computer. Gently flip the cooling fan assembly upside-down on the computer surface. Carefully grab the wire attached to the computer and pull away from the port.
    • Gently and carefully remove the cooling assembly to avoid ripping the wire attaching it to the computer.

    • Gently flip the cooling fan assembly upside-down on the computer surface.

    • Carefully grab the wire attached to the computer and pull away from the port.

    • The cooling fan is now safe for removal.

  6. When reinstalling heat sink and fans clean  off the old thermal paste from both the heat sink and the CPU and then add new paste to CPU
    • When reinstalling heat sink and fans clean off the old thermal paste from both the heat sink and the CPU and then add new paste to CPU

    • If your unfamiliar with applying thermal paste How to Apply Thermal Paste

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Chris Naughton

Üyelik tarihi: 07-04-2014

705 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 6-2, Forte Spring 2014 Cal Poly, Team 6-2, Forte Spring 2014 üyesi

CPSU-FORTE-S14S6G2

5 Üyeler

17 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 476