Ana içeriğe geç

Giriş

Both the battery and rear cover guides should be completed before completing this guide. This guide can be used for replacing a dying hard drive or upgrading your current hard drive.

Parçalar

Hiçbir parça belirtilmedi.

  1. Push orange locking tab with spudger right,  until battery lifts out of place. Laptop should be unplugged from power supply before removal. Laptop should be unplugged from power supply before removal.
    • Push orange locking tab with spudger right, until battery lifts out of place.

    • Laptop should be unplugged from power supply before removal.

  2. Unscrew the two  7 mm long #0 Phillips screws.
    • Unscrew the two 7 mm long #0 Phillips screws.

  3. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  4. Lift and remove the cover panel via the indentation in the middle of the panel.
    • Lift and remove the cover panel via the indentation in the middle of the panel.

  5. Push spudger to the left until hard drive is moved from its original position.
    • Push spudger to the left until hard drive is moved from its original position.

  6. Pull plastic flap and pull hard drive away from laptop.
    • Pull plastic flap and pull hard drive away from laptop.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Aaron Allison

Üyelik tarihi: 05-11-2018

433 İtibar

5 adet Kılavuz yazıldı

Takım

IUPUI, Team S1-G1, Baechle Fall 2018 IUPUI, Team S1-G1, Baechle Fall 2018 üyesi

IUPUI-BAECHLE-F18S1G1

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 83