Giriş
This guide will provide a step-by-step walk through on replacing the speakers in a HP Stream 8.
Neye ihtiyacın var
-
-
-
Use your nail or a spudger to pry the back cover off of the device.
FixBot'a Sor
-
-
-
Slide your finger around the rest of the back cover, lifting it completely off of the device.
-
-
-
-
-
Bu adımda kullanılan alet:Tweezers$4.99
-
Locate the two speakers at the bottom of the device.
-
Remove the two speakers by prying them out using a pair of tweezers.
-
Detach the red and black power wiring from the device and pull the speakers entirely out of the HP Stream 8.
-
-
-
Grab the two replacement speakers and the soldering iron.
-
Locate where the red and black power wiring previously connected to the device.
-
Attach and re-solder the red and black power wiring.
-
-
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.
Ekip
Cal Poly, Team 34-14, Maness Spring 2016 Cal Poly, Team 34-14, Maness Spring 2016 üyesi
CPSU-MANESS-S16S34G14
4 Üyeler
12 adet Kılavuz yazıldı
