HTC Vive Cosmos headstrap Pads Replacement

Giriş

Use this guide to replace the headstrap pads on an HTC Vive Cosmos.

What you need

Adım 1 Remove the rear headstrap pads

HTC Vive Cosmos headstrap Pads Replacement, Remove the rear headstrap pads: adım 1, 3 resimden 1.

HTC Vive Cosmos headstrap Pads Replacement, Remove the rear headstrap pads: adım 1, 3 resimden 2.

HTC Vive Cosmos headstrap Pads Replacement, Remove the rear headstrap pads: adım 1, 3 resimden 3.

Grasp the rear headstrap pad on one end and pull it away from the headstrap to remove it.

Düzenle

Adım 2 Remove the front headstrap pad

HTC Vive Cosmos headstrap Pads Replacement, Remove the front headstrap pad: adım 2, 3 resimden 1.

HTC Vive Cosmos headstrap Pads Replacement, Remove the front headstrap pad: adım 2, 3 resimden 2.

HTC Vive Cosmos headstrap Pads Replacement, Remove the front headstrap pad: adım 2, 3 resimden 3.

Grasp the front headstrap pad on one end and pull it away from the headstrap to remove it.
During reassembly, press the pads firmly against the headstrap, starting in the middle and moving toward the edges, until all the clips on the pads are completely seated in the headstrap. There should be no gaps between the pads and the headstrap.

Düzenle

Sonuç

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.