Eşyalarını Tamir Et Topluluk Mağaza

Holmes HEH8031 Fan Replacement

Giriş

This guide will show you how to safely remove and replace the fan assembly of the Holmes HEH8031.

Neye ihtiyacın var

  1. Holmes HEH8031 Fan Replacement, Housing: adım 1, 1 resimden 1.

    • Ensure the device is unplugged from the wall outlet.

    Düzenle

  2. Holmes HEH8031 Fan Replacement: adım 2, 1 resimden 1.

    • Remove eight 12-mm Phillips #2 screws from the back cover.

    Düzenle

  3. Holmes HEH8031 Fan Replacement: adım 3, 2 resimden 1. Holmes HEH8031 Fan Replacement: adım 3, 2 resimden 2.

    • Turn heater over so the controls are facing up.

    • Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.

    • Internal wires are connected to both halves of the housing. Be careful when separating the housing.

    Düzenle

  5. Holmes HEH8031 Fan Replacement, Circuit Board Removal: adım 4, 1 resimden 1.

    • Remove four 12mm Phillips #2 screws from the circuit board.

    Düzenle

  6. Holmes HEH8031 Fan Replacement, Circuit Board: adım 5, 3 resimden 1. Holmes HEH8031 Fan Replacement, Circuit Board: adım 5, 3 resimden 2. Holmes HEH8031 Fan Replacement, Circuit Board: adım 5, 3 resimden 3.

    • Desolder the BLACK wires from the "AC-L" point and "T/S" point.

    • Learn how to solder and desolder connections here!

    • Desolder the WHITE wire from the "AC-N" point.

    • Desolder the RED wire from the "FAN-RED".

    • Desolder the GREY wire from the "24V" point.

    • Desolder the BROWN wires from "HEAT1," and "HEAT2" points.

    • Be sure to use desoldering wick when you remove the wire connections.

    Düzenle

  7. Holmes HEH8031 Fan Replacement: adım 6, 2 resimden 1. Holmes HEH8031 Fan Replacement: adım 6, 2 resimden 2.

    • Desolder the WHITE connector (attached to the GRAY wire coming of the thermostat) from the "NTC101" point.

    Düzenle

  8. Holmes HEH8031 Fan Replacement, Fan: adım 7, 1 resimden 1.

    • Remove two Phillips #2 12mm screws from housing

    Düzenle

  9. Holmes HEH8031 Fan Replacement: adım 8, 1 resimden 1.

    • Remove zip tie from wire with pliers

    Düzenle

  10. Holmes HEH8031 Fan Replacement: adım 9, 1 resimden 1.

    • Separate fan assembly from heating coil

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Torben Eid

Üyelik tarihi: 10/13/16

1 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

IUPUI, Team 2-1, Baechle Fall 2016 IUPUI, Team 2-1, Baechle Fall 2016 üyesi

IUPUI-BAECHLE-F16S2G1

4 Üyeler

16 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 310