Eşyalarını Tamir Et Topluluk Mağaza

Hover-1 Coast Controller Battery Replacement

Giriş

In order for your Hover-1 Coast to be used, you must have a functioning controller. It is essential to have a fully functioning controller for the Hover-1 Coast to be used to it's full potential. This guide is not too difficult and can be done by anyone.

Neye ihtiyacın var

  1. Hover-1 Coast Controller Battery Replacement, Controller Battery: adım 1, 3 resimden 1. Hover-1 Coast Controller Battery Replacement, Controller Battery: adım 1, 3 resimden 2. Hover-1 Coast Controller Battery Replacement, Controller Battery: adım 1, 3 resimden 3.

    • Identify the three screws and using a Phillips #1 screwdriver loosen the the screws.

    • Remove the three screws.

    Düzenle

  2. Hover-1 Coast Controller Battery Replacement: adım 2, 3 resimden 1. Hover-1 Coast Controller Battery Replacement: adım 2, 3 resimden 2. Hover-1 Coast Controller Battery Replacement: adım 2, 3 resimden 3.

    • Pull the backside of the controller off.

    • The inside of the controller should look like this.

    • The marked area is the battery.

    Düzenle

  4. Hover-1 Coast Controller Battery Replacement: adım 3, 1 resimden 1.

    • Remove the black foam piece covering the battery.

    Düzenle

  5. Hover-1 Coast Controller Battery Replacement: adım 4, 2 resimden 1. Hover-1 Coast Controller Battery Replacement: adım 4, 2 resimden 2.

    • Desolder the battery connections from the motherboard.

    Düzenle

  6. Hover-1 Coast Controller Battery Replacement: adım 5, 2 resimden 1. Hover-1 Coast Controller Battery Replacement: adım 5, 2 resimden 2.

    • Using a plastic opening tool, pry the battery off the motherboard.

    • The inside of the controller should look like this.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 5

Her zaman: 387