Ana içeriğe geç

How To Replace the Battery on a Conair Trimmer (GMT15NCS)

Neye ihtiyacın var

  1. How To Replace the Battery on a Conair Trimmer (GMT15NCS), Conair Trimmer (GMT15NCS) Battery Replacement: adım 1, 3 resimden 1. How To Replace the Battery on a Conair Trimmer (GMT15NCS), Conair Trimmer (GMT15NCS) Battery Replacement: adım 1, 3 resimden 2. How To Replace the Battery on a Conair Trimmer (GMT15NCS), Conair Trimmer (GMT15NCS) Battery Replacement: adım 1, 3 resimden 3.
    • Using a Phillips #0 screwdriver, remove the two screws holding the trimmer blade in place.

    • Hold down the trimmer blades to make it easier to remove the screws.

  2. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 2, 2 resimden 1. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 2, 2 resimden 2.
    • Lift both of the trimmer blades off of the plastic guard.

  3. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 3, 3 resimden 1. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 3, 3 resimden 2. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 3, 3 resimden 3.
    • Separate the plastic guard from the casing by using the metal spudger tool.

    • Pry up at the top of the plastic guard, NOT the bottom.

  4. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 4, 2 resimden 1. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 4, 2 resimden 2.
    • Using a Phillips #000 screwdriver, remove the two screws inside the casing.

    • Tilt the trimmer to prevent the screws from falling into the casing.

  5. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 5, 1 resimden 1.
    • Using a Phillips #000 screwdriver, remove the casing screw at the bottom of the trimmer.

    • Tilt the trimmer so gravity helps the screw fall out.

  6. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 6, 3 resimden 1. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 6, 3 resimden 2. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 6, 3 resimden 3.
    • Fire Hazard: Be careful not to stick the metal spudger too deep when prying to avoid puncturing the battery.

    • Separate the casing at the seam using the metal spudger to release the clips.

    • Use a twisting or prying motion, in any direction, to separate the casing.

    • The same process may be needed on the other side's seam to release clips.

  7. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 7, 3 resimden 1. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 7, 3 resimden 2. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 7, 3 resimden 3.
    • Remove the two screws holding the battery setup in place.

    • Take note of the position of the positive and negative terminals of the battery on the setup.

  8. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 8, 1 resimden 1.
    • Lift the battery setup out of the casing.

    • Take note of how the battery setup lays in the casing.

  9. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 9, 3 resimden 1. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 9, 3 resimden 2. How To Replace the Battery on a Conair Trimmer (GMT15NCS): adım 9, 3 resimden 3.
    • The soldering iron with be hot.

    • Using the soldering iron, desolder the battery at the connection to remove the battery from the setup.

    • Use iFixit's guide on How To Solder and Desolder Connections if you are not familiar using a soldering tool.

Sonuç

To reassemble your device, solder the new 2.4 V battery into the setup, and follow the instructions in reverse.

2 farklı kişi bu kılavuzu tamamladı.

Bir Yorum

Where can I buy the batery

Wenceslao Hernandez - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 27

Son 30 gün: 94

Her zaman: 9,924