Ana içeriğe geç

Fix Your Stuff

Right to Repair

Parts & Tools

Giriş

A QMR Rail Hook on your hardback panel (attachment hook on the rack) is responsible for the correct positioning of the bike bag on your rack. It can be reattached or replaced in a few easy steps.

  1. Recess for thread plate.
    • Recess for thread plate.

    • If the defective thread plate is still on the rail, it can be removed with the help of a 3 mm hex key. Use the hex key to push the thread plate into the marked section and push down.

  2. Lift the oval rail slightly with the flathead screwdriver and replace the defective thread plate with the new one. Take care that the new oval thread plate is correctly inserted into the the rail.
    • Lift the oval rail slightly with the flathead screwdriver and replace the defective thread plate with the new one. Take care that the new oval thread plate is correctly inserted into the the rail.

  3. Set the black oval disc on the rail at the level of the silver thread plate.
    • Set the black oval disc on the rail at the level of the silver thread plate.

  4. Position the black QMR Rail Hook on the black disc, insert the screw and tighten it using the hex key. Position the black QMR Rail Hook on the black disc, insert the screw and tighten it using the hex key. Position the black QMR Rail Hook on the black disc, insert the screw and tighten it using the hex key.
    • Position the black QMR Rail Hook on the black disc, insert the screw and tighten it using the hex key.

Bitiş Çizgisi

Bu çevirmenlere özel teşekkürler:

100%

Bu çevirmenler dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

VAUDE Reparaturteam

Üyelik tarihi: 22-02-2016

5.517 İtibar

31 adet Kılavuz yazıldı

Takım

Vaudesport Vaudesport üyesi

Community

3 Üyeler

62 adet Kılavuz yazıldı

Bir Yorum

Thank you! Very helpful!

Chelsea Coleman - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 17

Her zaman: 514