How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes

Giriş

With mechanical disc brakes, we adjust brakes if our brake lever pulls all the way into the handle bar. This guide will show how to adjust those brakes, specifically Tektro Aries MD-M300. However, this process should work with other mechanical brakes too. The process is quite easy and anyone can complete the guide without extensive knowledge of bicycles.

Neye ihtiyacın var

Adım 1 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes

How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes, How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: adım 1, 1 resimden 1.

You will see a cable attached to an Allen bolt.

Düzenle

Adım 2

Loosen up the bolt with the help of Hex key set.

Düzenle

Adım 3

Now, pull the cable as much as you can.

Düzenle

Adım 4

Tighten up the bolt while you keep pulling the cable.

Düzenle

Adım 5

To center the caliper for a smooth breaking experience, loosen up the two bolts of the brake situated at top and at bottom.

Düzenle

The bolts that are being loosened in the picture are the wrong bolts for this adjustment. These bolts attach the brake assembly to the frame.

The adjustment bolts to keep the rotor centered between the disc pads have the heads facing up, and are just above the bolts pictured. The proper adjusting bolts allow the disc brake pads to move in the “cross bike” direction which is necessary for centering the rotor between the pads.

Richard Lange - 2 Şub 2025 Yanıt