Eşyalarını Tamir Et Topluluk Mağaza

Insignia Flex 11.6 Screen Replacement

Giriş

The steps provided will walk you through the necessary replacement for the screen. Complete the prerequisites before performing these tasks.

Neye ihtiyacın var

  1. Insignia Flex 11.6 Screen Replacement, Power Removal: adım 1, 3 resimden 1. Insignia Flex 11.6 Screen Replacement, Power Removal: adım 1, 3 resimden 2. Insignia Flex 11.6 Screen Replacement, Power Removal: adım 1, 3 resimden 3.

    • Before working on the device, make sure the device is off and not plugged into any power source for safety reasons. Failure to comply could result in injury.

    • Place the device on a firm surface with the device screen facing down.

    Düzenle

  2. Insignia Flex 11.6 Screen Replacement: adım 2, 2 resimden 1. Insignia Flex 11.6 Screen Replacement: adım 2, 2 resimden 2.

    • Remove 2, 6.1 mm Phillips J000 screws from the back of the device.

    • If any screws are stripped, refer to the ifixit guide for how to remove a stripped screw. How to Remove a Stripped Screw

    Düzenle

  3. Insignia Flex 11.6 Screen Replacement: adım 3, 3 resimden 1. Insignia Flex 11.6 Screen Replacement: adım 3, 3 resimden 2. Insignia Flex 11.6 Screen Replacement: adım 3, 3 resimden 3.
    Bu adımda kullanılan alet:
    Plastic Cards
    $2.99
    Satın Al

    • Using a plastic tool and the plastic card, gently pry off the back cover.

    Düzenle

  4. Insignia Flex 11.6 Screen Replacement: adım 4, 3 resimden 1. Insignia Flex 11.6 Screen Replacement: adım 4, 3 resimden 2. Insignia Flex 11.6 Screen Replacement: adım 4, 3 resimden 3.

    • Using tweezers, remove the electrical connector that connects to the battery to remove the power to the battery.

    Düzenle

  5. Insignia Flex 11.6 Screen Replacement, Motherboard: adım 5, 1 resimden 1.

    • Unplug the 2 speaker's connection from the motherboard.

    Düzenle

  7. Insignia Flex 11.6 Screen Replacement: adım 6, 2 resimden 1. Insignia Flex 11.6 Screen Replacement: adım 6, 2 resimden 2.

    • Peel the yellow tape off from on top of the electrical connectors.

    Düzenle

  8. Insignia Flex 11.6 Screen Replacement: adım 7, 2 resimden 1. Insignia Flex 11.6 Screen Replacement: adım 7, 2 resimden 2.

    • Flip up the black cover pieces to expose the 3 electrical connectors.

    • Remove 3 electrical connectors by gently pulling back on them with some tweezers.

    Düzenle

  9. Insignia Flex 11.6 Screen Replacement: adım 8, 3 resimden 1. Insignia Flex 11.6 Screen Replacement: adım 8, 3 resimden 2. Insignia Flex 11.6 Screen Replacement: adım 8, 3 resimden 3.

    • Unplug the 2 black ground wires from the motherboard by gently prying on them until they unhook from the motherboard.

    • Remove the black camera connector by gently prying on it until it unhooks.

    Düzenle

  10. Insignia Flex 11.6 Screen Replacement: adım 9, 2 resimden 1. Insignia Flex 11.6 Screen Replacement: adım 9, 2 resimden 2.

    • Using tweezers, remove the microphone from the the plastic cover.

    Düzenle

  11. Insignia Flex 11.6 Screen Replacement: adım 10, 1 resimden 1.

    • Remove 5 - 3.4 mm Phillips J000 screws from the motherboard.

    • Motherboard pops out.

    Düzenle

  12. Insignia Flex 11.6 Screen Replacement, Screen: adım 11, 3 resimden 1. Insignia Flex 11.6 Screen Replacement, Screen: adım 11, 3 resimden 2. Insignia Flex 11.6 Screen Replacement, Screen: adım 11, 3 resimden 3.

    • Remove battery by prying off with card.

    Düzenle

  13. Insignia Flex 11.6 Screen Replacement: adım 12, 2 resimden 1. Insignia Flex 11.6 Screen Replacement: adım 12, 2 resimden 2.

    • Peel back the copper color electrical connector with blue opening tool.

    Düzenle

  14. Insignia Flex 11.6 Screen Replacement: adım 13, 1 resimden 1.

    • Remove 12 - 4.15mm J000 Phillips screws from the metal bracket.

    • Bracket will then come off.

    Düzenle

  15. Insignia Flex 11.6 Screen Replacement: adım 14, 1 resimden 1.

    • Remove 1 - 3.4 mm J000 Phillips screw from metal plate bracket.

    Düzenle

  16. Insignia Flex 11.6 Screen Replacement: adım 15, 2 resimden 1. Insignia Flex 11.6 Screen Replacement: adım 15, 2 resimden 2.

    • Remove screen from case by prying with a card.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

6 Yorum

The Flex 11.6" Model# NS-P11W7100 DOEST HAVE THOSE SCREWS RIGHT THERE!!!!!

Charles Kinnison - Yanıt

yeah, thats the one I have. its quite a bit different. the speaker wires are soldered, too…

Joshua Francis -

mine doesn’t look like that…

Joshua Francis - Yanıt

where can i get a new screen to buy?

florence sefaa - Yanıt

Do you sell the insignia ns-p11w7100 tablet 11.6 inches screen? I need on to fix my broken part.

florence sefaa - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 27

Her zaman: 4,463