Ana içeriğe geç

JBL Clip 2 Audio AUX Cord Replacement

Neye ihtiyacın var

  1. JBL Clip 2 Audio AUX Cord Replacement, Audio AUX Cord: adım 1, 1 resimden 1.
    • Begin by removing the front cap of the JBL Clip 2 by using the blue plastic opening tool to get in between the creases.

    • If your JBL Clip 2 has never been opened this procedure will require moderate amount of force.

  2. JBL Clip 2 Audio AUX Cord Replacement: adım 2, 1 resimden 1.
    • There will be six 3 mm T8 screws under the cap, remove these six screws. Save

    • If you are not trying to replace the speaker please ignore the two middle 3 mm T8 screws during this procedure.

  3. JBL Clip 2 Audio AUX Cord Replacement: adım 3, 1 resimden 1.
    • The front cover will lift open easily and the components will be visible.

  4. JBL Clip 2 Audio AUX Cord Replacement: adım 4, 1 resimden 1.
    • To completely remove the top portion, disconnect the speaker from the motherboard using the blue plastic opening tool.

    • While disconnecting be sure to not use too much force as these two parts are meant to become disconnected.

  5. JBL Clip 2 Audio AUX Cord Replacement: adım 5, 1 resimden 1.
    • There will be four 3 mm T8 screws holding the motherboard in place, remove these four screws.

  6. JBL Clip 2 Audio AUX Cord Replacement: adım 6, 1 resimden 1.
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Michael Hong

Üyelik tarihi: 02/01/17

1.014 İtibar

5 adet Kılavuz yazıldı

Ekip

UW Tacoma, Team 2-2, Rose Winter 2017 UW Tacoma, Team 2-2, Rose Winter 2017 üyesi

UWT-ROSE-W17S2G2

4 Üyeler

7 adet Kılavuz yazıldı

Bir Yorum

<a href="https://www.w3schools.com/">Visit W3Schools.com!</a>

pavan kalyan - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 7

Son 30 gün: 31

Her zaman: 3,617