Giriş

To start, the Front Cover Teardown guide must be used. Later, soldering guides will be used.

Have the camera facing up and the flash closest to you.
  • Have the camera facing up and the flash closest to you.

  • Unscrew the two 6.2 mm Phillips screws on the top half of the camera.

Yorum Ekle

Flip camera to other side-with flash farthest from you.
  • Flip camera to other side-with flash farthest from you.

  • Unscrew top two 6.2mm Phillips screws on this side.

Yorum Ekle

Turn the camera so the bottom is facing up with the front facing away.
  • Turn the camera so the bottom is facing up with the front facing away.

  • Unscrew the 6.2mm Phillips screw on the top right.

  • The front cover is now unscrewed and should be lifted up evenly and removed.

Yorum Ekle

Once the front cover is off, desolder the connections at both ends of the flash.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nick

Üyelik tarihi: 26-04-2011

1 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 25-28, Garner Spring 2011 Cal Poly, Team 25-28, Garner Spring 2011 üyesi

CPSU-GARNER-S11S25G28

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 10

Her zaman: 1,476