Ana içeriğe geç

Kurio Motion MotherBoard Replacement

Neye ihtiyacın var

  1. Kurio Motion MotherBoard Replacement, MotherBoard: adım 1, 1 resimden 1.
    • Use the Phillips #0 Screwdriver to remove four 5mm screws from sides of the device.

  2. Kurio Motion MotherBoard Replacement: adım 2, 1 resimden 1.
    • Use the Ifixit opening tool to pry open the device to remove the back of the Kurio Motion.

  3. Kurio Motion MotherBoard Replacement: adım 3, 1 resimden 1.
    • Remove the tape covering the tape from the edges of the battery.

  4. Kurio Motion MotherBoard Replacement: adım 4, 1 resimden 1.
    • Remove the orange connectors that are connected to the motherboard by lifting up the white tab, and then gently pulling the connector out.

  5. Kurio Motion MotherBoard Replacement: adım 5, 1 resimden 1.
    • Take out the 5mm screws located at the top right and left of the motherboard.

  6. Kurio Motion MotherBoard Replacement: adım 6, 1 resimden 1.
    • Remove the tape covering the camera gently.

  7. Kurio Motion MotherBoard Replacement: adım 7, 1 resimden 1.
    • Use your spudger to carefully take out the camera.

  8. Kurio Motion MotherBoard Replacement: adım 8, 1 resimden 1.
    • Use your soldering tool to solder the wires that are connected to the battery and the gray wire next them.

  9. Kurio Motion MotherBoard Replacement: adım 9, 1 resimden 1.
    • Use your soldering tool to solder the wires that are connected to the speakers.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazeed Ayyad

Üyelik tarihi: 09/10/23

447 İtibar

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 23