Eşyalarını Tamir Et Topluluk Mağaza

Kurio Motion Speakers Replacement

Giriş

Does your tablet give out poor sound or does not give sound at all? It is probably time to change your speakers. Refer to this guide to learn how to change your speakers. This will require you to solder so use this guide to help.

Neye ihtiyacın var

  1. Kurio Motion Speakers Replacement, Speakers: adım 1, 1 resimden 1.

    • Use the Phillips #0 Screwdriver to remove four 5mm screws from sides of the device.

    Düzenle

  2. Kurio Motion Speakers Replacement: adım 2, 1 resimden 1.

    • Use the Ifixit opening tool to pry open the device to remove the back of the Kurio Motion.

    Düzenle

  4. Kurio Motion Speakers Replacement: adım 3, 1 resimden 1.

    • Remove the tape covering the tape from the edges of the battery.

    Düzenle

  5. Kurio Motion Speakers Replacement: adım 4, 1 resimden 1.

    • Use your soldering tool to solder the wires that are connected to the motherboard. There should be four wires.

    Düzenle

  6. Kurio Motion Speakers Replacement: adım 5, 1 resimden 1.

    • Use your spudger to carefully pry out the speakers from underneath.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Yazeed Ayyad

Üyelik tarihi: 09/10/23

447 İtibar

3 adet Kılavuz yazıldı

Rozetler: 3

Ekip

University of New Orleans, Team 3-7, McDonald Fall 2023 University of New Orleans, Team 3-7, McDonald Fall 2023 üyesi

UNO-MCDONALD-F23S3G7

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 22