Ana içeriğe geç

LERSTA Floor Lamp Screw Terminal Replacement

Neye ihtiyacın var

  1. LERSTA Floor Lamp Screw Terminal Replacement, Screw Terminal: adım 1, 2 resimden 1. LERSTA Floor Lamp Screw Terminal Replacement, Screw Terminal: adım 1, 2 resimden 2.
    • Unplug the lamp.

  2. LERSTA Floor Lamp Screw Terminal Replacement: adım 2, 1 resimden 1.
    • Rotate the bulb counterclockwise to remove the light bulb.

  3. LERSTA Floor Lamp Screw Terminal Replacement: adım 3, 1 resimden 1.
    • Rotate the lamp shade counterclockwise.

  4. LERSTA Floor Lamp Screw Terminal Replacement: adım 4, 1 resimden 1.
    • Take the three parts aside after dismantling the lamp shade.

  5. LERSTA Floor Lamp Screw Terminal Replacement: adım 5, 1 resimden 1.
    • Dismantle the lamp shaft by rotating it counterclockwise.

  6. LERSTA Floor Lamp Screw Terminal Replacement: adım 6, 1 resimden 1.
    • Use a Phillips screwdriver to remove the two 3 mm screws from the silver cover.

    • Pull down both the silver cover and the black screw terminal.

  7. LERSTA Floor Lamp Screw Terminal Replacement: adım 7, 1 resimden 1.
    • Separate the light bulb socket from the silver cover by pulling the silver metal hasp in right-downward direction towards the lamp shaft.

    • Exert force on the both left and right hand sides of the hasp and then pull the hasp downward.

  8. LERSTA Floor Lamp Screw Terminal Replacement: adım 8, 1 resimden 1.
    • Replace the old bulb socket with a newly-purchased one.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Replacing the screw terminal of the floor lamp is relatively easy, but be cautious to deal with the step of the substitution of the light socket.

[deleted]

Üyelik tarihi: 05/09/20

157 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 21

Her zaman: 937