LG Front Load Washing Machine Rotor Replacement

Giriş

Use this guide to replace the rotor in your LG front load washing machine.

The rotor is part of the washer's direct drive motor. It doesn't have any electrical components and is less likely to break compared to the motor stator.

This guide will work for most LG front load washing machines. This guide is written with a model WM3050CW washer. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.

Neye ihtiyacın var

Adım 1 Safety Precautions

LG Front Load Washing Machine Rotor Replacement, Safety Precautions: adım 1, 2 resimden 1.

LG Front Load Washing Machine Rotor Replacement, Safety Precautions: adım 1, 2 resimden 2.

Before you begin your repair, perform the following:
Turn off the main water supply
Unplug your washer
Disconnect all water connections at the rear of your washer

Düzenle

Adım 2 Unfasten the rear panel

LG Front Load Washing Machine Rotor Replacement, Unfasten the rear panel: adım 2, 3 resimden 1.

LG Front Load Washing Machine Rotor Replacement, Unfasten the rear panel: adım 2, 3 resimden 2.

LG Front Load Washing Machine Rotor Replacement, Unfasten the rear panel: adım 2, 3 resimden 3.

Remove the screw(s) securing the rear panel.

Düzenle

Adım 3 Remove the rear panel

LG Front Load Washing Machine Rotor Replacement, Remove the rear panel: adım 3, 3 resimden 1.

LG Front Load Washing Machine Rotor Replacement, Remove the rear panel: adım 3, 3 resimden 2.

LG Front Load Washing Machine Rotor Replacement, Remove the rear panel: adım 3, 3 resimden 3.

Unclip the rear panel from the chassis.

Düzenle

Adım 4

Remove the rear panel.

Düzenle

Adım 5 Unfasten the rotor

LG Front Load Washing Machine Rotor Replacement, Unfasten the rotor: adım 5, 2 resimden 1.

LG Front Load Washing Machine Rotor Replacement, Unfasten the rotor: adım 5, 2 resimden 2.

Use an impact driver to remove the 17 mm nut securing the rotor.
Alternatively, you can use a wrench and a hammer to loosen the nut.
To secure the rotor, you can insert a screwdriver, or a similar tool, between the rotor and the stator. Make sure to brace the tool against one of the screw bosses on the stator.

Düzenle

Adım 6 Remove the rotor

LG Front Load Washing Machine Rotor Replacement, Remove the rotor: adım 6, 2 resimden 1.

LG Front Load Washing Machine Rotor Replacement, Remove the rotor: adım 6, 2 resimden 2.

The rotor is magnetically attracted to the stator.
Pull the rotor straight off the stator and drive shaft splines to remove it.
Wiggle the rotor as you pull to help disconnect it.
This may require significant force.
During reassembly, watch your fingers when aligning the rotor over the stator, as the rotor gets sucked in easily.