LG G3 Earpiece Replacement

Onarım Topluluğuna Katılın - Hesap Oluşturun

Giriş

Use this guide to replace the earpiece speaker in the LG G3 (D855).

Neye ihtiyacın var

Adım 1 Back Cover

LG G3 Earpiece Replacement, Back Cover: adım 1, 2 resimden 1.

LG G3 Earpiece Replacement, Back Cover: adım 1, 2 resimden 2.

Power off your phone before beginning disassembly.
Insert a thumbnail, or a prying tool like a spudger, into the notch at the bottom left of the back cover.
Pry the back cover up to separate its plastic clips.

Düzenle

Adım 2

Lift the back cover to release the rest of the plastic clips and remove it.
In case you can't lift the back cover completely, slide your fingernail or your prying tool around the midframe to release the remaining clips.
To reinstall the back cover, press it firmly into place until you hear a snap from the plastic clips to form a seamless connection with the rear side of the phone.

Düzenle

Adım 3 Battery

LG G3 Earpiece Replacement, Battery: adım 3, 2 resimden 1.

LG G3 Earpiece Replacement, Battery: adım 3, 2 resimden 2.

Use a fingernail or a prying tool at the marked notch to lever the battery out of its recess.

Düzenle

Adım 4

Lift the battery out of its recess and remove it.

Düzenle

Adım 5 Loudspeaker

LG G3 Earpiece Replacement, Loudspeaker: adım 5, 1 resimden 1.

Remove the four Phillips #00 screws (4 mm length).

Düzenle

Adım 6

Insert a thumbnail, or a prying tool like a spudger, into the notch at the bottom left of the back cover you used earlier to remove the back cover.
Pry up the plastic panel, including the loudspeaker, until you can get a good grip.

Düzenle

Adım 7

LG G3 Earpiece Replacement: adım 7, 3 resimden 3.

Carefully remove the plastic panel including the loudspeaker by gently pulling it away from the phone assembly.

Düzenle

Adım 8 Motherboard Cover Assembly

LG G3 Earpiece Replacement, Motherboard Cover Assembly: adım 8, 1 resimden 1.

Remove the eight Phillips #00 screws (4 mm length).

Düzenle

Adım 9

LG G3 Earpiece Replacement: adım 9, 3 resimden 3.

Insert an opening pick between the bottom right corner of the motherboard cover and the motherboard.
Pry up the motherboard cover to open the plastic clips which hold the cover in its place.
The clips can be a bit resistive. If you're having trouble prying up the motherboard cover, slightly rotate the opening pick sideways to make the process easier.
Work your way along the right edge.

Düzenle

Adım 10

LG G3 Earpiece Replacement: adım 10, 3 resimden 3.

Carefully lift the right edge of the motherboard cover.
The remaining plastic clips should open during this process or can be unhinged easily by hand.
Remove the motherboard assembly.

Düzenle

Adım 11 Motherboard

LG G3 Earpiece Replacement, Motherboard: adım 11, 2 resimden 1.

LG G3 Earpiece Replacement, Motherboard: adım 11, 2 resimden 2.

Use a spudger to pry up and disconnect the display flex cable.

Düzenle

Adım 12

Use a spudger to pry up and disconnect the digitizer flex cable.

Düzenle

Adım 13

Use a spudger to pry up and disconnect the rear camera flex cable.

Düzenle

Adım 14

Use a spudger to pry up and disconnect the front camera flex cable.

Düzenle

Adım 15

During these next few steps, make sure to avoid damaging the flex cables you disconnected.
Slide an opening pick under the bottom right corner of the motherboard and slowly pry it out of its recess by rotating the opening pick sideways.

Düzenle

Adım 16

Slide the opening pick under the right edge of the motherboard where the SIM card slot is located and pry it up by rotating the opening pick sideways.

Düzenle

Adım 17

Grab the top section of the motherboard and carefully lift it out of the phone.

Düzenle

Adım 18 Earpiece speaker

LG G3 Earpiece Replacement, Earpiece speaker: adım 18, 2 resimden 1.

LG G3 Earpiece Replacement, Earpiece speaker: adım 18, 2 resimden 2.

Bu adımda kullanılan alet:

Tweezers

$4.99

Satın Al

During removal of the earpiece speaker, remove it together with the foam gasket underneath.
Use a pair of tweezers to remove the earpiece speaker.

Düzenle

Sonuç

If possible, turn on your device and test your repair before installing new adhesive and resealing.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers Community for help.