Giriş
The LCD screens are connected as one unit, and therefore should be removed together.
Neye ihtiyacın var
-
-
Remove the two triangular pads at the top of the two speakers.
-
These pads have adhesive to keep them situated, so you may want to use a fine-tipped object, such as a screwdriver or a pen, to remove them. It is easiest to place the fine-tipped object in the small indent in the corner of these pads.
-
-
-
The faceplate is still attached through speakers that travel from the ear-piece to the motherboard.
-
Carefully wedge the flat or pointed end of the spudger beneath the ear-piece and the faceplate.
-
This may require a bit of force, as the ear-piece is stuck to the faceplate with adhesive.
-
-
-
Wedge the spudger into the small gap between the phone and the metal casing of the motherboard.
-
Slide the spudger underneath the metal and along the edge. The motherboard should begin to rise.
-
Now use the spudger to lift the other side of the motherboard.
-
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.