Lenovo ThinkPad T495s Trackpad Replacement

Jessica Costa ve 4 diğer katkıda bulunanlar

En son March 11, 2024 tarihinde güncellendi

10 - 15 dakika

Kolay

Giriş

If you need to replace the trackpad of your Lenovo ThinkPad T495s, follow the steps in the guide below. Be aware that you will need to remove the battery before the trackpad. The trackpad does the same job as a mouse on a desktop computer does. You use the trackpad to control the mouse pointer that is displayed on the laptop screen.

Neye ihtiyacın var

Parçalar

Lenovo ThinkPad Touchpad Cable ‑ 02HM513 - 02HM513

Aletler

Daha fazlasını göster…

Adım 1 Back Panel

Lenovo ThinkPad T495s Trackpad Replacement, Back Panel: adım 1, 1 resimden 1.

Do not begin until the laptop is unplugged and completely powered off.
Flip the laptop over to reveal the back panel of the laptop.

Düzenle

Adım 2

Lenovo ThinkPad T495s Trackpad Replacement: adım 2, 3 resimden 3.

Loosen the five 4.0 mm captive screws with a Phillips #1 screwdriver.
The screws will stay attached to the back cover as you lift it off.

Düzenle

Adım 3 Battery

Lenovo ThinkPad T495s Trackpad Replacement, Battery: adım 3, 3 resimden 1.

Lenovo ThinkPad T495s Trackpad Replacement, Battery: adım 3, 3 resimden 2.

Lenovo ThinkPad T495s Trackpad Replacement, Battery: adım 3, 3 resimden 3.

Bu adımda kullanılan alet:

Tweezers

$4.99

Sepete Ekle

Use tweezers to unplug the battery connection from the motherboard.

Düzenle

Adım 4

Lenovo ThinkPad T495s Trackpad Replacement: adım 4, 3 resimden 3.

Remove the five 4.5 mm screws with a Phillips #1 screwdriver.
There are plastic tabs at the bottom of the battery, so pull it slightly forward with your hands, toward the motherboard, before lifting straight up.

Düzenle

Adım 5 Trackpad

Lenovo ThinkPad T495s Trackpad Replacement, Trackpad: adım 5, 3 resimden 1.

Lenovo ThinkPad T495s Trackpad Replacement, Trackpad: adım 5, 3 resimden 2.

Lenovo ThinkPad T495s Trackpad Replacement, Trackpad: adım 5, 3 resimden 3.

Use the iFixit Opening Tool to flip up the small locking flap on the trackpad's one ZIF ribbon cable connection. The ribbon cable should easily release from its socket.
ZIF stands for Zero Insertion Force; if you're experiencing any resistance whatsoever during disconnection, double-check that the locking flaps are flipped up.

Düzenle