Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

This guide will cover how to remove and replace the battery in the Lenovo ThinkPad X1 Carbon 6th Gen. This may be necessary if your battery is faulty, or simply just old. Laptop batteries will lose some of their capacity as they are used, and the typical battery only lasts a few years. If you are having trouble with your computer, and believe that the battery is at fault, consult our troubleshooting page before attempting to replace the battery. Keep in mind that a faulty power adapter may be causing the issues. Before beginning, be sure to power off your laptop and disconnect it from any power source. Use caution when handling the battery and dispose of it properly.

Parçalar

Hiçbir parça belirtilmedi.

  1. Use a Phillips #0 screwdriver to loosen the five screws that secure the back cover to the laptop. The screws do not completely come off from the back cover. Loosen until the screws are completely loose.
    • Use a Phillips #0 screwdriver to loosen the five screws that secure the back cover to the laptop.

    • The screws do not completely come off from the back cover. Loosen until the screws are completely loose.

  2. Use a Jimmy to lift the cover directly up off of the locating pins. Though a  metal opening tool is shown in the image, we recommend using plastic opening tools to minimize any cosmetic damage.
    • Use a Jimmy to lift the cover directly up off of the locating pins.

    • Though a metal opening tool is shown in the image, we recommend using plastic opening tools to minimize any cosmetic damage.

    • Once the case is lifted enough using the tool, grab the cover and take it the rest of the way off.

    • If you encounter resistance when lifting the cover, revisit the screws to see if any of them are still threaded on to the device.

  3. Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al

    Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al
  4. Use the Phillips #0 screwdriver to remove the four 5 mm screws that secure the battery to the laptop frame. Use the Phillips #0 screwdriver to remove the four 5 mm screws that secure the battery to the laptop frame.
    • Use the Phillips #0 screwdriver to remove the four 5 mm screws that secure the battery to the laptop frame.

  5. Take out the battery by lifting it  from the bottom edge of the laptop, and then pulling away from the motherboard.
    • Take out the battery by lifting it from the bottom edge of the laptop, and then pulling away from the motherboard.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Michael Megna

Üyelik tarihi: 23-01-2020

825 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team S19-G4, White Winter 2020 Cal Poly, Team S19-G4, White Winter 2020 üyesi

CPSU-WHITE-W20S19G4

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 6

Son 7 gün: 37

Son 30 gün: 206

Her zaman: 653