Giriş

The heat sink transfers excess thermal energy away from the CPU to the fan and cooling system in order to protect the CPU's delicate components.

Remove all twelve 6 mm long screws on the back of the laptop with a Phillips #1 screwdriver. Apply a lot of pressure to prevent the screws from stripping.
  • Remove all twelve 6 mm long screws on the back of the laptop with a Phillips #1 screwdriver.

    • Apply a lot of pressure to prevent the screws from stripping.

    • Make sure to turn off the computer first!

Yorum Ekle

Pull off the back cover of the laptop. It should come off easily. Pull off the back cover of the laptop. It should come off easily.
  • Pull off the back cover of the laptop. It should come off easily.

Yorum Ekle

Remove all six 7mm screws from the heat sink using the Phillips #1 screwdriver. Remove all six 7mm screws from the heat sink using the Phillips #1 screwdriver.
  • Remove all six 7mm screws from the heat sink using the Phillips #1 screwdriver.

Yorum Ekle

Remove the heat sink. Take note of the gray thermal paste on the back of the heat sink.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 başka kişi bu kılavuzu tamamladı.

Kevin Silken

Üyelik tarihi: 21-01-2015

331 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 18-1, Maness Winter 2015 Cal Poly, Team 18-1, Maness Winter 2015 üyesi

CPSU-MANESS-W15S18G1

5 Üyeler

7 adet Kılavuz yazıldı

Bir Yorum

Hope someone see this cmt. I cannot lift up the heat sink for some reason. All 6 screws are removed. Any advice?

Dalala - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 11

Son 30 Gün: 67

Tüm Zamanlar: 3,577