Giriş

This guide will lead you in desoldering the connections between the camera and the motherboard.

  1. Remove the two 8mm Phillips#0 screws on the back cover.
    • Remove the two 8mm Phillips#0 screws on the back cover.

    • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

    Yorum Ekle

  2. Remove the four 6mm Phillips#0 screws  connecting the motherboard and front cover.
    • Remove the four 6mm Phillips#0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

    Yorum Ekle

    • Remove the two 8mm Phillips#0 screws on the back of the motherboard.

    Yorum Ekle

    • Remove the camera from the motherboard by desoldering the two connections as shown.

    • Follow this link to learn how to properly solder and desolder your parts.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

nieko

Üyelik tarihi: 18-04-2013

63 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 12-34, Amido Spring 2013 Cal Poly, Team 12-34, Amido Spring 2013 üyesi

CPSU-AMIDO-S13S12G34

4 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 2

Son 30 Gün: 7

Her zaman: 1,626