Ana içeriğe geç

Marshall MS-2 Speaker Replacement

Neye ihtiyacın var

  1. Marshall MS-2 Speaker Replacement, Disassembling Marshall MS-2 Micro Amp Case Disassembly: adım 1, 1 resimden 1.
    • First be sure to turn the power switch to the off position.

    • Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

  2. Marshall MS-2 Speaker Replacement: adım 2, 3 resimden 1. Marshall MS-2 Speaker Replacement: adım 2, 3 resimden 2. Marshall MS-2 Speaker Replacement: adım 2, 3 resimden 3.
    • Now remove the battery.

    • On the back of the device locate the battery cover.

    • Remove it by pushing down on the clip.

    • Then pull the piece of fabric until the battery comes out.

  3. Marshall MS-2 Speaker Replacement: adım 3, 2 resimden 1. Marshall MS-2 Speaker Replacement: adım 3, 2 resimden 2.
    • Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

    • Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

  4. Marshall MS-2 Speaker Replacement: adım 4, 1 resimden 1.
    • Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

  5. Marshall MS-2 Speaker Replacement, Speaker: adım 5, 1 resimden 1.
  6. Marshall MS-2 Speaker Replacement: adım 6, 2 resimden 1. Marshall MS-2 Speaker Replacement: adım 6, 2 resimden 2.
    • Remove the two 7/16" screws located in the bottom left and top right corners with a phillips head screw driver. After removing the screws, the metal clips will need to be removed as well.

  7. Marshall MS-2 Speaker Replacement: adım 7, 1 resimden 1.
    • You may now remove the speaker by pulling it straight out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

MacKinley

Üyelik tarihi: 10/22/13

811 İtibar

5 adet Kılavuz yazıldı

4 Yorum

So where do we find a replacement speaker? If no parts are required what is the point in taking the speaker out?

Patrick Gillett - Yanıt

This speaker unavailable in Marlins. Any online sources. How should an untutored amateur repairer describe the replacement in order to get the right thing

Patrick Gillett - Yanıt

Any speaker that will fit should work. Might want to check to make sure the Watts they consume are the same. I imagine that if you put a speaker in that consumes more Watts you could potentially over heat the power supply or other components.

MacKinley - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 27

Her zaman: 4,224