Eşyalarını Tamir Et Topluluk Mağaza

Microsoft Surface Pro 7 Kickstand Replacement

Giriş

Follow this guide to replace the kickstand on your Microsoft Surface Pro 7.

Some photos in this guide are from a different model and may contain slight visual discrepancies, but they won't affect the guide procedure.

Neye ihtiyacın var

  1. Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: adım 1, 3 resimden 1. Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: adım 1, 3 resimden 2. Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: adım 1, 3 resimden 3.

    • Lift the kickstand to expose the hinge screws.

    Düzenle

  2. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand screws: adım 2, 2 resimden 1. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand screws: adım 2, 2 resimden 2.

    • Remove the four 2.7 mm T3 screws—two on each side of the kickstand.

    Düzenle

  4. Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: adım 3, 3 resimden 1. Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: adım 3, 3 resimden 2. Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: adım 3, 3 resimden 3.

    • Move the kickstand back down to a flat position.

    • The hinges are stiff and you may need to use some force to get it down.

    Düzenle

  5. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: adım 4, 3 resimden 1. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: adım 4, 3 resimden 2. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: adım 4, 3 resimden 3.

    • Remove the kickstand from the back cover.

    • There are two adhesive tabs in the middle of the kickstand that disengage most easily when the kickstand is pulled directly downward from the device.

    • Be sure to insert these tabs when reinstalling the new kickstand before replacing the screws.

    Düzenle
Sonuç

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Bir başkası bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Sam Omiotek

Üyelik tarihi: 02/25/19

73.429 İtibar

288 adet Kılavuz yazıldı

Rozetler: 35

+32 tane daha rozet

2 Yorum

One of the hinges broke on my Surface Pro 6.

1. I removed the broken hinge, closed the kickstand and duct taped the seam.

2. I opened the kickstand wide and duct taped the seam.

The single hinge and duct tape seem to be working!

"Spare the duct tape, spoil the job." - Red Green

P Best - Yanıt

What are the parts used for this fix?

Andrea Shaw - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 9

Son 7 gün: 58

Son 30 gün: 219

Her zaman: 6,574