Giriş

Before proceeding with the replacement guide, please ensure the headphones are unplugged from any device.

  1. See the speaker replacement guide and follow steps 1 and 2.
    • See the speaker replacement guide and follow steps 1 and 2.

    Yorum Ekle

  2. Use the T6 torx screwdriver to remove the seven screws located around the headphone cover and place the screws in a safe place.
    • Use the T6 torx screwdriver to remove the seven screws located around the headphone cover and place the screws in a safe place.

    • To avoid stripping screws, be sure to use the right drill bit oriented perpendicular to the face of the screw.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Carefully lift the speaker out of its housing while leaving all wires connected.

    Yorum Ekle

    • Lift the module out of the headphone cup, leaving all wires attached.

    • Clip the two wires circled in orange.

    • Now that the speaker is free set it aside.

    • Clip the two wires circled in yellow.

    • Replace speaker module and solder it to the two wires circled in orange.

    • Now solder the speaker wires (circled in yellow) back to the module.

    • For soldering see the ifixit soldering guide: How To Solder and Desolder Connections

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Ben

Üyelik tarihi: 24-02-2014

104 İtibar

1 Kılavuz yazıldı

Takım

Michigan Tech, Team 5-1, Lauer Spring 2014 Michigan Tech, Team 5-1, Lauer Spring 2014 üyesi

MTU-LAUER-S14S5G1

2 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 136