NexiGo NS32 Joystick PCB Replacement

Jedrzej Kostecki ve 3 diğer katkıda bulunanlar

En son July 2, 2024 tarihinde güncellendi

5 - 10 dakika

Orta

Giriş

This is a guide on how to replace the controller sticks from inside the NexiGo NS32. There are 8 specific steps in this guide that describe how to take the controller sticks out of the controller. Be careful not to damage any of the internal components.

Neye ihtiyacın var

Aletler

Daha fazlasını göster…

Adım 1 Rear Case

NexiGo NS32 Joystick PCB Replacement, Rear Case: adım 1, 1 resimden 1.

Orient the controller so that it is face down.

Düzenle

Adım 2

Remove the eight 9 mm Phillips screws that secure the rear case.

Düzenle

Adım 3

Lift the rear case up and off.
You may need to use an opening tool to help release the rear case, but avoid using excessive force so you don't damage the controller.

Düzenle

Adım 4 Battery

NexiGo NS32 Joystick PCB Replacement, Battery: adım 4, 2 resimden 1.

NexiGo NS32 Joystick PCB Replacement, Battery: adım 4, 2 resimden 2.

Grip the white battery connector and pull it directly out of its motherboard socket.
This may require some force, as the connectors are secured with a bit of adhesive. If you're having trouble with disconnection, apply some high-concentration isopropyl alcohol to the adhesive to loosen it.
Do not pull on the wires.