Eşyalarını Tamir Et Topluluk Mağaza

Ninja Mega Kitchen System BL770 LED Light Replacement

Giriş

If you notice the LED lights on your device are continuously blinking or not working at all, this step-by-step guide will show you how to replace them individually, or all together. For soldering help, follow the How to Solder and Desolder Connections guide.

Neye ihtiyacın var

  1. Ninja Mega Kitchen System BL770 LED Light Replacement, LED Light: adım 1, 2 resimden 1. Ninja Mega Kitchen System BL770 LED Light Replacement, LED Light: adım 1, 2 resimden 2.

    • On the circuit board, locate the LED light you wish to replace.

    • On the bottom of the board, each LED is designated with a small triangle with a line at one tip and a label of LED1, LED2, etc.

    Düzenle

  3. Ninja Mega Kitchen System BL770 LED Light Replacement: adım 2, 1 resimden 1.

    • Desolder the two LED leads to the specific bulb.

    • Remove the LED from the circuit board.

    • Properly install the new LED and solder to the board.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 11

Her zaman: 579