Adım 1 Loosen the rear screws


Bu adımda kullanılan alet:
Phillips #00 Screwdriver
$5.49
Satın Al
• Use a Phillips PH00 screwdriver to loosen the four screws along the top of the back cover.
• All screws in this device are JIS screws. Official iFixit PH000-PH1 Phillips screwdrivers are designed to be compatible with JIS screws, so they are safe to use. Using a screwdriver other than an official iFixit screwdriver or a JIS screwdriver may result in stripped screws.
• The screws are held in place by locking washers, and will not come out of the back cover.
Düzenle
32 yorum
Yorum Ekle
Yorum Ekle
1024
İptal Yorum gönder
Adım 2 Remove the rear cover



• Hold the device in one hand and turn it over.
• Grab the top edge of the back cover with your opposite hand so that the cover does not fall back into place.
• Flip the 3DS over again so that the back cover is facing up.
• Pull the back cover up and away from the rest of the device to remove it.
Düzenle
1 yorum
Yorum Ekle
Yorum Ekle
1024
İptal Yorum gönder

Bu kılavuzu göm

Bu kılavuzu, sitenizin / forumunuzun içine küçük bir parçacık olarak yerleştirmek için, bir boyut seçin ve aşağıdaki kodu kopyalayın.

<iframe id="dozuki-embed-5557" src="https://tr.ifixit.com/Guide/embed/5557/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-5557"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://tr.ifixit.com/Guide/embed/5557" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Önizleme