Ana içeriğe geç

Giriş

Follow this guide to repair the glass and frame.

  1. Remove the back cover.
    • Remove the back cover.

  2. Remove the battery.
    • Remove the battery.

  3. Remove 5 long screws, pink arrow
    • Remove 5 long screws, pink arrow

    • Remove 3 short screws, blue arrow

  4. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  5. With a thin tool, unhook the central body from the back cover, along the entire profile of the phone With a thin tool, unhook the central body from the back cover, along the entire profile of the phone
    • With a thin tool, unhook the central body from the back cover, along the entire profile of the phone

  6. Unclip the touchscreen connector Unhook the display connector Unhook the motherboard from the central phone body
    • Unclip the touchscreen connector

    • Unhook the display connector

    • Unhook the motherboard from the central phone body

  7. Pull up the central frame from the touchscreen assembly by lifting the clips on the perimeter with a thin tool. Pull up the central frame from the touchscreen assembly by lifting the clips on the perimeter with a thin tool.
    • Pull up the central frame from the touchscreen assembly by lifting the clips on the perimeter with a thin tool.

  8. Remove the light sensor from the old frame with the help of a heat source.
    • Remove the light sensor from the old frame with the help of a heat source.

    • Insert the sensor in the new frame.

  9. Remove film that protects double-sided adhesive from the new touchscreen glass Insert flat touchscreen into the frame slot and adhere the double sided adhesive to the frame by placing it in the correct position Insert flat touchscreen into the frame slot and adhere the double sided adhesive to the frame by placing it in the correct position
    • Remove film that protects double-sided adhesive from the new touchscreen glass

    • Insert flat touchscreen into the frame slot and adhere the double sided adhesive to the frame by placing it in the correct position

Sonuç

To reassemble the device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Bu çevirmenlere özel teşekkürler:

100%

Bu çevirmenler dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

Smilzo

Üyelik tarihi: 09-11-2013

5.531 İtibar

29 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 17

Her zaman: 600