Ana içeriğe geç
Nook Simple Touch with GlowLight Motherboard Replacement

Nook Simple Touch with GlowLight Motherboard Replacement

Sydney Segear

Sydney Segear ve 4 diğer katkıda bulunanlar

En son June 2, 2023 tarihinde güncellendi

5 dakika
Orta

Has the performance of your NOOK Simple Touch with GlowLight declined drastically? Or will the device not turn on or charge and other troubleshooting measures have been unsuccessful? You may need to replace the motherboard.

Before using this guide make sure you check out our trouble shooting page to rule out other issues such as the charging port or battery.

Never work on a device that is plugged into a power outlet. Before starting this guide, ensure that the Nook is powered off and the power adapter is disconnected.

Neye ihtiyacın var

Aletler

  1. Nook Simple Touch with GlowLight Motherboard Replacement, Power Button: adım 1, 1 resimden 1.
    • Place the Nook with the screen facing down.

  2. Nook Simple Touch with GlowLight Motherboard Replacement: adım 2, 1 resimden 1.
    • Wedge the opening tool between the power button and the upper edge of the device.

    • Push the opening tool down to pry the power button up.

  3. Nook Simple Touch with GlowLight Motherboard Replacement: adım 3, 1 resimden 1.
    • Using your fingers, gently remove the power button.

  4. Nook Simple Touch with GlowLight Motherboard Replacement, Back Cover: adım 4, 1 resimden 1.
    • Remove the single screw using a T4 Torx screwdriver.

  5. Nook Simple Touch with GlowLight Motherboard Replacement: adım 5, 1 resimden 1.
    • Slide the back cover down towards you in the direction of the charging port.

  6. Nook Simple Touch with GlowLight Motherboard Replacement, Battery: adım 6, 2 resimden 1. Nook Simple Touch with GlowLight Motherboard Replacement, Battery: adım 6, 2 resimden 2.
    • Detach the white cable connector from the motherboard.

    • Remove the battery from the device.

  7. Nook Simple Touch with GlowLight Motherboard Replacement, Motherboard: adım 7, 1 resimden 1.
    • Remove eleven screws from the motherboard using the T4 screwdriver.

  8. Nook Simple Touch with GlowLight Motherboard Replacement: adım 8, 3 resimden 1. Nook Simple Touch with GlowLight Motherboard Replacement: adım 8, 3 resimden 2. Nook Simple Touch with GlowLight Motherboard Replacement: adım 8, 3 resimden 3.
    • Disconnect the orange ribbon cable from the motherboard.

    • Using your fingers, gently lift the motherboard from the display.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Sydney Segear

Üyelik tarihi: 03/01/23

401 İtibar

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 24

Her zaman: 137