Parçalar

Hiçbir parçaya gerek yok.

Flip over the turntable and remove the nine screws on the outer edges.
  • Flip over the turntable and remove the nine screws on the outer edges.

Yorum Ekle

Find the audio jacks located on the back side of the turntable. Remove the screw located in between the right and left audio jacks.
  • Find the audio jacks located on the back side of the turntable.

  • Remove the screw located in between the right and left audio jacks.

Yorum Ekle

Remove the back cover by pulling it apart.
  • Remove the back cover by pulling it apart.

Yorum Ekle

Remove the grounding hardware located next to the audio jacks.
  • Remove the grounding hardware located next to the audio jacks.

Yorum Ekle

Remove the ground screw and washers. Remove the ground screw and washers.
  • Remove the ground screw and washers.

Yorum Ekle

Remove the remaining nut and washer.
  • Remove the remaining nut and washer.

Yorum Ekle

Remove the screw located on the back panel of the audio jack housing.
  • Remove the screw located on the back panel of the audio jack housing.

Yorum Ekle

Remove the screw that connects the audio jacks to the biggest circuit board via wire. Remove the screw that connects the audio jacks to the biggest circuit board via wire. Remove the screw that connects the audio jacks to the biggest circuit board via wire.
  • Remove the screw that connects the audio jacks to the biggest circuit board via wire.

Yorum Ekle

Gently pull out the audio input jacks from the audio input housing.
  • Gently pull out the audio input jacks from the audio input housing.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nikolai

Üyelik tarihi: 12-10-2011

161 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 17-14, Regan Fall 2011 Cal Poly, Team 17-14, Regan Fall 2011 üyesi

CPSU-REGAN-F11S17G14

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 4

Her zaman: 1,029