Office Chair Gas Cylinder Replacement

Christian Phillip ve 4 diğer katkıda bulunanlar

En son June 19, 2024 tarihinde güncellendi

30 dakika

Orta

Giriş

The gas cylinder in an office chair provides the chair with the ability to change its desired height with ease. If the height of an office chair is no longer adjustable, the gas cylinder may need to be replaced. This guide will provide its readers with the information and supplies required to replace the gas chamber in any generic office chair. This process with take roughly 30 minutes to complete with a moderate difficulty. The required tools for this replacement are the new gas cylinder, a torque wrench, WD-40, and a drill/screw driver. After the completion of this process, the reader will have successfully replaced their office chair's gas cylinder.

Neye ihtiyacın var

Parçalar

Gas Cylinder
Ortaklık bağlantısı
Amazon tedarikçisinden satışta
Görüntüle

Aletler

Daha fazlasını göster…

iFixit bu bağlantılar üzerinden satın aldığınızda komisyon kazanır.

Adım 1 Gas Cylinder

Office Chair Gas Cylinder Replacement, Gas Cylinder: adım 1, 1 resimden 1.

Place the chair horizontally, putting it on its side.

Düzenle

Adım 2

The base is connected to the chair either with retaining clips or nuts and bolts at its center.
Remove the retaining clips or unscrew the nuts and bolts with a wrench or drill.
Remove the base of the chair.

Düzenle

Adım 3

Place a pipe wrench on the gas cylinder, and spray it with WD-40 to lubricate it and make it easier to remove.
Twist and pull the wrench to loosen the cylinder and remove it from its place.

Düzenle

Adım 4

Look up the chair's part number to find which gas cylinders are compatible with your chair.

Düzenle

Adım 5

Be sure to follow the instructions for your specific gas cylinder, since installation procedures may vary.
Place the tapered part of the cylinder into the column and rotate it into place.
Reconnect the base of the chair.
Place the chair upright and adjust the chair to your preferred height. Test it out by sitting on it.