Eşyalarını Tamir Et Topluluk Mağaza

Oral-B White Pro 1000 Motherboard Replacement

Giriş

Motherboard Replacement guide for Oral-B White Pro 1000 rechargeable electric toothbrush due to faulty operation. This guide illustrates the disassembly of the Oral-B White Pro 1000 electric toothbrush. Use caution not to short the positive (+) and negative (-) terminals when handling the battery. This guide also requires the use of a soldering tool which reaches high temperatures. Refer to this helpful guide for some great soldering and desoldering tips.

Neye ihtiyacın var

  1. Oral-B White Pro 1000 Motherboard Replacement, Motherboard: adım 1, 1 resimden 1.

    • Remove the brush head by pulling the top away from the base.

    Düzenle

  2. Oral-B White Pro 1000 Motherboard Replacement: adım 2, 3 resimden 1. Oral-B White Pro 1000 Motherboard Replacement: adım 2, 3 resimden 2. Oral-B White Pro 1000 Motherboard Replacement: adım 2, 3 resimden 3.

    • Pry open the end cap from the toothbrush body.

    • Remove the spring.

    Düzenle

  3. Oral-B White Pro 1000 Motherboard Replacement: adım 3, 2 resimden 1. Oral-B White Pro 1000 Motherboard Replacement: adım 3, 2 resimden 2.

    • Apply pressure on the brush shaft to release the toothbrush internals.

    • Remove the internals through the bottom of the toothbrush body.

    Düzenle

  5. Oral-B White Pro 1000 Motherboard Replacement: adım 4, 2 resimden 1. Oral-B White Pro 1000 Motherboard Replacement: adım 4, 2 resimden 2.

    • Use flat head screwdriver to remove power button pressure plate.

    Düzenle

  6. Oral-B White Pro 1000 Motherboard Replacement: adım 5, 3 resimden 1. Oral-B White Pro 1000 Motherboard Replacement: adım 5, 3 resimden 2. Oral-B White Pro 1000 Motherboard Replacement: adım 5, 3 resimden 3.

    • Desolder the coil wire from the motherboard.

    • Check out this helpful guide for some soldering and desoldering tips.

    • Squeeze and remove coil from motherboard.

    Düzenle

  7. Oral-B White Pro 1000 Motherboard Replacement: adım 6, 2 resimden 1. Oral-B White Pro 1000 Motherboard Replacement: adım 6, 2 resimden 2.

    • Desolder the motor from motherboard.

    • Remove motherboard and battery from body of toothbrush internals.

    Düzenle

  8. Oral-B White Pro 1000 Motherboard Replacement: adım 7, 2 resimden 1. Oral-B White Pro 1000 Motherboard Replacement: adım 7, 2 resimden 2.

    • Desolder the battery connections from the motherboard.

    • Remove motherboard from battery holder.

    Düzenle
Sonuç

Reattach new motherboard and reassemble your device following instructions in reverse order. Solder appropriate connections during reassembly.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Hannah Parker

Üyelik tarihi: 11/08/17

203 İtibar

1 Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

IUPUI, Team S5-G4, Baechle Fall 2017 IUPUI, Team S5-G4, Baechle Fall 2017 üyesi

IUPUI-BAECHLE-F17S5G4

3 Üyeler

6 adet Kılavuz yazıldı

Bir Yorum

Motor are brushless?

joseferreira_ms - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 12

Son 30 gün: 62

Her zaman: 2,617