Eşyalarını Tamir Et Topluluk Mağaza

Otium Bluetooth Headphones Battery Replacement

Giriş

The Otium Bluetooth Headphones are rated for 500 charge cycles. If your headphones will not hold charge, or charge at all, you may need to replace the battery.

Neye ihtiyacın var

    • Power off your earbuds first.

    • Use a pry tool to unclip the cover of the left earbud.

    Düzenle

  2. Otium Bluetooth Headphones Battery Replacement: adım 2, 2 resimden 1. Otium Bluetooth Headphones Battery Replacement: adım 2, 2 resimden 2.

    • Carefully remove the battery from the housing.

    • The battery is connected by two fragile wires.

    • Shown is a 3.7v 100mAh Lithium Polymer (LiPo) battery.

    Düzenle

  4. Otium Bluetooth Headphones Battery Replacement: adım 3, 2 resimden 1. Otium Bluetooth Headphones Battery Replacement: adım 3, 2 resimden 2.

    • Carefully peel back the rubber cover from the protection circuit module (PCM).

    • Remove the cover and save to re-use.

    • The rubber is attached using Kapton tape and hot glue.

    Düzenle

  5. Otium Bluetooth Headphones Battery Replacement: adım 4, 2 resimden 1. Otium Bluetooth Headphones Battery Replacement: adım 4, 2 resimden 2.

    • Carefully bend the PCM away from the battery to make desoldering the two wires easier.

    Düzenle

    • Use a soldering iron to desolder the two wires from the PCM.

    • Adding a JST connector would make future repairs much easier!

    • Recycle your old battery!

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Geralt

Üyelik tarihi: 11/28/14

1.894 İtibar

2 adet Kılavuz yazıldı

Rozetler: 16

+13 tane daha rozet

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 12

Son 30 gün: 54

Her zaman: 780