Eşyalarını Tamir Et Topluluk Mağaza

PS3 Dual Shock 3 Controler Charging Port Replacement

Giriş

To complete this repair, the user must possess skills in soldering, and proper tools needed to perform the repair.

Neye ihtiyacın var

  1. PS3 Dual Shock 3 Controler Charging Port Replacement, Opening the Controller: adım 1, 1 resimden 1.

    • Remove the 5 screws on the back of the controller.

    • The back housing of the controller can now be removed.

    Düzenle

  2. PS3 Dual Shock 3 Controler Charging Port Replacement, Removing the Battery: adım 2, 1 resimden 1.

    • Remove battery by unlatching the battery cables from battery connector clip.

    Düzenle

  3. PS3 Dual Shock 3 Controler Charging Port Replacement, Freeing the Motherboard: adım 3, 1 resimden 1.

    • Remove the two screws holding the motherboard to the front controller housing.

    • Next, remove the motherboard assembly from the controller housing. This is done by pressing in the clips on each side of the handle.

    • Freeing the motherboard from the housing will provide better access to the charging port.

    Düzenle

  5. PS3 Dual Shock 3 Controler Charging Port Replacement, Preparing the Soldering Station: adım 4, 1 resimden 1.

    • Prepare your station for the de-soldering of the charging port.

    Düzenle

  6. PS3 Dual Shock 3 Controler Charging Port Replacement, Desoldering: adım 5, 3 resimden 1. PS3 Dual Shock 3 Controler Charging Port Replacement, Desoldering: adım 5, 3 resimden 2. PS3 Dual Shock 3 Controler Charging Port Replacement, Desoldering: adım 5, 3 resimden 3.
    Bu adımda kullanılan alet:
    Desoldering Pump
    $3.99
    Satın Al

    • To remove the defective charging port, you will need to de-solder the 9 pins holding the port to the motherboard.

    • First, used the desoldering pump to remove the solder from all 9 pins.

    • Then, use the desoldering wick to remove any excess solder left on the motherboard.

    Düzenle

  7. PS3 Dual Shock 3 Controler Charging Port Replacement, Securing New Charging Port: adım 6, 1 resimden 1.

    • After the charging port is removed, place the new charging port into position.

    • Hold the new port in place by using a clip to keep it from moving.

    Düzenle

  8. PS3 Dual Shock 3 Controler Charging Port Replacement, Soldering The New Port: adım 7, 2 resimden 1. PS3 Dual Shock 3 Controler Charging Port Replacement, Soldering The New Port: adım 7, 2 resimden 2.

    • Tin the soldering iron before soldering the connections. This is done by applying a small amount of solder to the tip of the hot iron.

    • Solder the 9 pin connections that connect the charging port to the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow instructions 1-3 in reverse order.

15 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Attak

Üyelik tarihi: 12/04/17

595 İtibar

1 Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

5 Yorum

Shall DualShock3 require other than GND and VBUS for charging only

and does DS3 follow the standards of USB-miniB (eg: Data wires flipping).

Sony does have some fame to sacrifice standards over extra capability delivery.

JanLS - Yanıt

Would you guys happen to know, if my labeling is correct? I’m going to upgrade to USB-C.

https://imgur.com/a/RL68Yw5

Howling Beats - Yanıt

Thank you it's really useful, tips,

Alan - Yanıt

Thanks for this. But now there are four different USB charging ports, how to tell which one of them is suitable? kasynparts eg

kasynlife - Yanıt

please attak if you still using this platfrom i really need you to help me with a ps3 controller pins

Deyaa Alshapshiri - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 gün: 72

Son 30 gün: 319

Her zaman: 16,973