Panasonic HDC-TM15 Record Button Replacement

Emma ve başka bir katkıda bulunan

En son April 21, 2021 tarihinde güncellendi

15 - 30 dakika

Orta

Dilim ve Zar

Giriş

1. adıma git

The Record button can be found on the back end of the camera, beside the battery. If the record button is not functioning properly, it will need to be replaced. This guide will show a Panasonic HDC-TM15 owner how to remove the broken button and replace it with a new one.

Neye ihtiyacın var

Aletler

Phillips #00 Screwdriver

Adım 1 Record Button

Panasonic HDC-TM15 Record Button Replacement, Record Button: adım 1, 1 resimden 1.

Using the Phillips #00 Screwdriver, unscrew the five .5 mm Phillips #00 screws on the hand-strap side of the camcorder.

Düzenle

Adım 2

Unscrew the six .5 mm Phillips #00 screws on the bottom of the camcorder.

Düzenle

Adım 3

Panasonic HDC-TM15 Record Button Replacement: adım 3, 3 resimden 3.

Once all eleven screws have been removed, put your hand through the hand-strap and tug on the side cover until it comes off completely.
The inside of your camcorder should now be completely exposed, as shown in the photos.

Düzenle

Adım 4

Unscrew the two 1 mm Phillips #00 black screws in the corners of the green memory card reader.
The screws should be surrounded by orange circles.

Düzenle

Adım 5

Unscrew the black 1 mm Phillips #00 black screw in the left center beside the green motherboard.

Düzenle

Adım 6

Unscrew the 1.2 mm Phillips #00 black screw beneath the motherboard on the bottom of the camcorder.
The green motherboard should now be partially detached, as shown in the photo.

Düzenle

Adım 7

Panasonic HDC-TM15 Record Button Replacement: adım 7, 3 resimden 3.

Remove the long silver plate that secures the record button.

Düzenle

Adım 8

Remove the old record button from beneath the silver plate.

Düzenle

Adım 9

Place the new Record button into the open slot.

Düzenle

Adım 10

Slide the silver plate into place beside the new Record button.
Ensure that the Battery Eject button is lined up properly.

Düzenle

Adım 11

Re-screw the green motherboard into place and re-attach the side cover to your camcorder.
When the side cover is securely fastened, you have completed the Record Button replacement of your Panasonic HDC-TM15 camcorder.

Düzenle