Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Use this guide to correctly repair damaged or loose wires in your Panasonic phone. Loose or damaged wires can lead to functions such as speakerphone not operating correctly, as well as calls being dropped completely. If damaged, replacing the wires is necessary to keep the phone functioning.

If you need help with soldering, review how to solder and desolder connections.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the battery cover by sliding the cover piece down Remove the battery cover by sliding the cover piece down
    • Remove the battery cover by sliding the cover piece down

  2. Remove the two AAA batteries. Remove the two AAA batteries.
    • Remove the two AAA batteries.

  3. TÜM SEKMELERİ AÇ

    Mac için RAM Yükseltme Kit'leri

    Kit Satın Al

    Tüm Sekmeler İçin Yeterli RAM

    Kit Satın Al
  4. Unscrew the two screw at the bottom of the device.
    • Unscrew the two screw at the bottom of the device.

  5. Using the iFixit opening tool, pry open the back of the phone.
    • Using the iFixit opening tool, pry open the back of the phone.

  6. Identify damaged or loose wires. If loose, adjust till properly placed. If damaged, solder the new wire(s) to the mother board or desired location. Identify damaged or loose wires. If loose, adjust till properly placed. If damaged, solder the new wire(s) to the mother board or desired location.
    • Identify damaged or loose wires. If loose, adjust till properly placed. If damaged, solder the new wire(s) to the mother board or desired location.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 11

Her zaman: 139