Pocophone F1 Back Cover Removal

Giriş

Use this guide to remove the back cover on your Xiaomi Pocophone F1.

Neye ihtiyacın var

Adım 1 Remove the SIM tray

Pocophone F1 Back Cover Removal, Remove the SIM tray: adım 1, 3 resimden 1.

Pocophone F1 Back Cover Removal, Remove the SIM tray: adım 1, 3 resimden 2.

Pocophone F1 Back Cover Removal, Remove the SIM tray: adım 1, 3 resimden 3.

Before you begin, switch off your phone.
Insert a SIM eject tool or a paperclip into the small hole on the SIM card tray on the left edge of the phone.
Press firmly to eject the tray.
Remove the SIM card tray.
When reinserting the cards, make sure to properly orient them in the tray.

Düzenle

ନେଟଓ୍ବାର୍କ ଆସୁନି

Ajay Kumar - 29 Ağu 2023 Yanıt

Adım 2 Unfasten the back cover screws

Pocophone F1 Back Cover Removal, Unfasten the back cover screws: adım 2, 1 resimden 1.

Remove the two 2.7 mm-long Torx T3 screws from the bottom edge of your phone.

Düzenle

They are Torx T3 screws

Niklas Abel - 16 Oca 2021 Yanıt

Adım 3 Insert an opening tool

Pocophone F1 Back Cover Removal, Insert an opening tool: adım 3, 3 resimden 1.

Pocophone F1 Back Cover Removal, Insert an opening tool: adım 3, 3 resimden 2.

Pocophone F1 Back Cover Removal, Insert an opening tool: adım 3, 3 resimden 3.

Insert an opening tool between the screen and the back cover at the bottom edge of the screen.
Slide the opening tool to the bottom right corner to release the plastic clips holding the back cover in place.

Düzenle

Be careful to identify the correct groove to attack with the opening tool. The correct groove is the one adjacent to the screen and not the one embossed on the back cover.

geoffrey - 18 Tem 2022 Yanıt

Adım 4 Release the clips

Pocophone F1 Back Cover Removal, Release the clips: adım 4, 3 resimden 1.

Pocophone F1 Back Cover Removal, Release the clips: adım 4, 3 resimden 2.

Pocophone F1 Back Cover Removal, Release the clips: adım 4, 3 resimden 3.

Slide the opening tool around the bottom right corner.
Slide the opening tool along the right edge of the Pocophone F1 to release the plastic clips.

Düzenle

Adım 5

Slide the opening tool along the top edge of the phone to release the plastic clips holding the back cover in place.

Düzenle

Adım 6

Pocophone F1 Back Cover Removal: adım 6, 3 resimden 3.

Slide the opening tool along the left edge of the phone to release the remaining plastic clips.
Try not to remove the back cover all the way yet, the flex cable of the fingerprint sensor is still connected to the motherboard.

Düzenle

Adım 7

Pocophone F1 Back Cover Removal: adım 7, 3 resimden 3.

Carefully fold the phone assembly to the left side of the back cover like you'd open a book page.
Avoid tensioning the fingerprint flex cable during this procedure.

Düzenle

Adım 8 Unfasten screws

Pocophone F1 Back Cover Removal, Unfasten screws: adım 8, 1 resimden 1.

Remove the ten 3.2 mm-long Phillips screws.

Düzenle

Adım 9

Pocophone F1 Back Cover Removal: adım 9, 3 resimden 3.

Slide an opening pick under the bottom left corner of the motherboard cover.
Slide the opening pick around the corner and along the left edge of the motherboard cover to release the plastic clips holding it in place.
Use the opening pick to pry up the motherboard cover.