Eşyalarını Tamir Et Topluluk Mağaza

Protocol Neo-Drone AP Motor Replacement

Giriş

This guide shows you how to replace the motors on your drone. Soldering is a skill required for this task. Replacement motors can be found on the manufacturer's website.

Neye ihtiyacın var

  1. Protocol Neo-Drone AP Motor Replacement, Motor: adım 1, 2 resimden 1. Protocol Neo-Drone AP Motor Replacement, Motor: adım 1, 2 resimden 2.

    • Remove the four blades by pulling them off of the motors.

    Düzenle

  2. Protocol Neo-Drone AP Motor Replacement: adım 2, 1 resimden 1.

    • Remove the blade guards by pushing the guards downward towards the padded feet.

    Düzenle

  4. Protocol Neo-Drone AP Motor Replacement: adım 3, 1 resimden 1.

    • Remove the four 4.5mm Phillips #0 screws from the back panel.

    Düzenle

  5. Protocol Neo-Drone AP Motor Replacement: adım 4, 2 resimden 1. Protocol Neo-Drone AP Motor Replacement: adım 4, 2 resimden 2.

    • Use the flat end of a spudger to pry apart the the two pieces.

    • Lift the back panel up to separate it from the front panel.

    Düzenle

  6. Protocol Neo-Drone AP Motor Replacement: adım 5, 1 resimden 1.

    • Pull the four motors out of the case.

    • The motors are still soldered to the motherboard.

    Düzenle

  7. Protocol Neo-Drone AP Motor Replacement: adım 6, 1 resimden 1.

    • Here is a link to the iFixit Soldering Guide

    • Use a soldering iron to desolder the motors from the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Andrew

Üyelik tarihi: 07/05/18

291 İtibar

2 adet Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

IUPUI, Team S2-G3, Harley Summer 2018 IUPUI, Team S2-G3, Harley Summer 2018 üyesi

IUPUI-HARLEY-SU18S2G3

4 Üyeler

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 398