Eşyalarını Tamir Et Topluluk Mağaza

Ridgid GEN5X R8642 Switch Replacement

Giriş

This guide is to help users replace their faulty switch for the Ridgid GEN5X R8642 saw. For this guide you will need: a soldering iron, a spudger, a T20 Torx Screwdriver, a J1 size Phillips head screwdriver, and a replacement switch for Ridgid GEN5X R8642, and a good attitude.


Neye ihtiyacın var

  1. Ridgid GEN5X R8642 Switch Replacement, Switch: adım 1, 1 resimden 1.

    • Remove the plastic tab holding the handle cover in place by prying upward with the spudger until the tab pops off.

    Düzenle

  2. Ridgid GEN5X R8642 Switch Replacement: adım 2, 1 resimden 1.

    • Remove the handle cover by pulling it towards the front of the saw.

    • The grip can sometimes become stuck and may require a decent amount of force to remove.

    Düzenle

  3. Ridgid GEN5X R8642 Switch Replacement: adım 3, 2 resimden 1. Ridgid GEN5X R8642 Switch Replacement: adım 3, 2 resimden 2.

    • Use a T20 Torx screwdriver to remove the nine M4 X 16mm screws from the plastic housing.

    Düzenle

  5. Ridgid GEN5X R8642 Switch Replacement: adım 4, 1 resimden 1.

    • Use a JIS #1 screwdriver to remove the two M4 x 25mm screws on both sides of the metal housing.

    Düzenle

  6. Ridgid GEN5X R8642 Switch Replacement: adım 5, 1 resimden 1.

    • Remove one half of the plastic housing using a spudger so that the internal system is exposed.

    Düzenle

  7. Ridgid GEN5X R8642 Switch Replacement: adım 6, 1 resimden 1.

    • Remove the plastic wire covers to the red and black connections on the switch assembly.

    Düzenle

  8. Ridgid GEN5X R8642 Switch Replacement: adım 7, 1 resimden 1.

    • Remove the soldered connection from the switch assembly.

    Düzenle

  9. Ridgid GEN5X R8642 Switch Replacement: adım 8, 1 resimden 1.
    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 8

Her zaman: 281