Eşyalarını Tamir Et Topluluk Mağaza

Ridgid R82005 Motor Replacement

Giriş

The Ridgid R82005 drill has preventative mechanics to cease overheating, although operators may still experience difficulties with the motor due to overloading caused by improperly adjusting both the two speed gear train and torque adjustment ring.

Neye ihtiyacın var

  1. Ridgid R82005 Motor Replacement, Housing Assembly: adım 1, 1 resimden 1.

    • Eject the battery from the drill.

    • Unscrew the seven M3x15.3mm screws, with the 2mm hex screwdriver bit, that secures the Housing Assembly.

    Düzenle

  2. Ridgid R82005 Motor Replacement: adım 2, 1 resimden 1.

    • Push the metallic Housing Connecting clip out with flat side of the plastic opening tool.

    • Eject battery before attempting this step.

    Düzenle

  4. Ridgid R82005 Motor Replacement: adım 3, 2 resimden 1. Ridgid R82005 Motor Replacement: adım 3, 2 resimden 2.

    • Remove the top half of the Housing Assembly.

    Düzenle

  5. Ridgid R82005 Motor Replacement: adım 4, 2 resimden 1. Ridgid R82005 Motor Replacement: adım 4, 2 resimden 2.

    • Grasp carefully the top and bottom of drill components.

    • LED light needs to be manually removed.

    • Lift and transfer, as a whole, the drill components from the old housing assembly to the new housing.

    • Make sure all drill components fit properly in the grooves of new Housing Assembly.

    Düzenle

  6. Ridgid R82005 Motor Replacement, Motor: adım 5, 3 resimden 1. Ridgid R82005 Motor Replacement, Motor: adım 5, 3 resimden 2. Ridgid R82005 Motor Replacement, Motor: adım 5, 3 resimden 3.

    • Push the two pins through the motor assembly.

    • We used an Alan wrench to push the pins through, but any small tool will do.

    • Unsolder the wires from the back of the motor to free the motor from the trigger assembly.

    • To learn how to solder, check out the How to Solder and Desolder Connections guide.

    • Make sure all drill components fit properly in the grooves of the Housing Assembly.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Andrew McPherson

Üyelik tarihi: 02/14/19

479 İtibar

3 adet Kılavuz yazıldı

Rozetler: 17

+14 tane daha rozet

Ekip

USF Tampa, Team S1-G2, Leahy Spring 2019 USF Tampa, Team S1-G2, Leahy Spring 2019 üyesi

USFT-LEAHY-S19S1G2

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 16

Her zaman: 798