Eşyalarını Tamir Et Topluluk Mağaza

Rival Mini Chopper MC-67BL Turning Gears Replacement

Giriş

This guide will help you remove the turning gears of the Rival Mini Blender. Removing the gears will allow you to access the interior components of the device.

Neye ihtiyacın var

  1. Rival Mini Chopper MC-67BL Turning Gears Replacement, Turning Gears: adım 1, 2 resimden 1. Rival Mini Chopper MC-67BL Turning Gears Replacement, Turning Gears: adım 1, 2 resimden 2.

    • Twist the plastic lid counterclockwise to unlock it.

    • Lift the lid to remove it from the container.

    Düzenle

  2. Rival Mini Chopper MC-67BL Turning Gears Replacement: adım 2, 1 resimden 1.

    • Carefully remove the blade from the container.

    • For reassembly, the teeth on the metal shaft line up with slots on the inside of the plastic hole.

    Düzenle

  3. Rival Mini Chopper MC-67BL Turning Gears Replacement: adım 3, 1 resimden 1.

    • With your hand, twist the container counter-clockwise until it unlocks from the base. Remove the container by lifting it straight up.

    Düzenle

  5. Rival Mini Chopper MC-67BL Turning Gears Replacement: adım 4, 1 resimden 1.

    • Use your fingers to pry out the two rubber feet from the bottom cover of the base.

    • The two feet furthest from the button tower contain screws. The other two feet do not.

    Düzenle

  6. Rival Mini Chopper MC-67BL Turning Gears Replacement: adım 5, 2 resimden 1. Rival Mini Chopper MC-67BL Turning Gears Replacement: adım 5, 2 resimden 2.

    • Use the Phillips #2 screwdriver to unscrew the two 12.7-mm screws underneath the rubber feet.

    • Use the same screwdriver to unscrew the 15.88-mm screw from the back of the chopper.

    Düzenle

  7. Rival Mini Chopper MC-67BL Turning Gears Replacement: adım 6, 1 resimden 1.

    • Firmly lift the bottom cover off of the base.

    Düzenle

  8. Rival Mini Chopper MC-67BL Turning Gears Replacement: adım 7, 1 resimden 1.

    • Remove the smaller white gear by lifting it up with your hand.

    Düzenle

  9. Rival Mini Chopper MC-67BL Turning Gears Replacement: adım 8, 3 resimden 1. Rival Mini Chopper MC-67BL Turning Gears Replacement: adım 8, 3 resimden 2. Rival Mini Chopper MC-67BL Turning Gears Replacement: adım 8, 3 resimden 3.

    • Use a pair of pliers or any other clamping tool to securely hold the blade-shaft that sits above the base.

    • Grab the gear with your other hand and turn CLOCKWISE. Unlike most screws, the gear is reverse-threaded to allow the blade to spin.

    • Continue turning the gear until completely removed from the blade-shaft.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

6 tane daha katılımcı ile

Roxanne

Üyelik tarihi: 10/17/13

522 İtibar

4 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

Cal Poly, Team 4-29, Amido Fall 2013 Cal Poly, Team 4-29, Amido Fall 2013 üyesi

CPSU-AMIDO-F13S4G29

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 3

Her zaman: 805