Eşyalarını Tamir Et Topluluk Mağaza

Ryobi Compact 18 Volt Hammer Drill P214 Trigger Replacement

Giriş

If you need to fix or reinstall a new trigger for your Ryobi P214 cordless drill, access the inside panel with this guide. The trigger, when pressed, completes a circuit with the battery to turn on the drill. A faulty trigger will cause the drill to not turn or to turn off randomly while using the drill. Before beginning, make sure to power off your P214 drill off by completely disconnecting it from the battery.

Neye ihtiyacın var

  1. Ryobi Compact 18 Volt Hammer Drill P214 Trigger Replacement, Battery: adım 1, 3 resimden 1. Ryobi Compact 18 Volt Hammer Drill P214 Trigger Replacement, Battery: adım 1, 3 resimden 2. Ryobi Compact 18 Volt Hammer Drill P214 Trigger Replacement, Battery: adım 1, 3 resimden 3.

    • Detach the battery unit from the drill body and pull the battery outwards.

    • If the battery doesn't disconnect easily, gently wiggle the battery back and forth until it comes out.

    Düzenle

  2. Ryobi Compact 18 Volt Hammer Drill P214 Trigger Replacement, Housing Assembly: adım 2, 1 resimden 1.

    • Remove ten 13.5 mm screws from the drill casing using a Phillips #2 screwdriver to gain access to the interior.

    Düzenle

  4. Ryobi Compact 18 Volt Hammer Drill P214 Trigger Replacement: adım 3, 3 resimden 1. Ryobi Compact 18 Volt Hammer Drill P214 Trigger Replacement: adım 3, 3 resimden 2. Ryobi Compact 18 Volt Hammer Drill P214 Trigger Replacement: adım 3, 3 resimden 3.

    • Grab the sides of the housing and pull straight up until the housing pulls away revealing the inside assembly.

    Düzenle

  5. Ryobi Compact 18 Volt Hammer Drill P214 Trigger Replacement, Trigger: adım 4, 3 resimden 1. Ryobi Compact 18 Volt Hammer Drill P214 Trigger Replacement, Trigger: adım 4, 3 resimden 2. Ryobi Compact 18 Volt Hammer Drill P214 Trigger Replacement, Trigger: adım 4, 3 resimden 3.

    • Gently lift the battery clip to gain access to the trigger.

    • You can now clean any debris blocking the trigger.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Robert Campbell

Üyelik tarihi: 02/09/23

73 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

University of North Texas, Team 2-4, Saru Jimmy Spring 2023 University of North Texas, Team 2-4, Saru Jimmy Spring 2023 üyesi

UNT-SARU JIMMY-S23S2G4

4 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 9

Her zaman: 208