/
Tezgahım

Cihazların için kılavuz, parça ve yanıtlara hızlı erişim edin

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Üye Ol
Giriş Yap
Dünyanın en büyük onarım topluluğuna katılın
Samsung Galaxy A11 Vibration Motor Replacement

Samsung Galaxy A11 Vibration Motor Replacement

Kristen Gismondi

Kristen Gismondi

En son December 18, 2024 tarihinde güncellendi

Tahmin yok
Orta
Daha iyi giriş
Eksik Ayrıntılar

Neye ihtiyacın var

Aletler

Daha fazlasını göster…

  1. Samsung Galaxy A11 Vibration Motor Replacement, Back Cover: adım 1, 3 resimden 1. Samsung Galaxy A11 Vibration Motor Replacement, Back Cover: adım 1, 3 resimden 2. Samsung Galaxy A11 Vibration Motor Replacement, Back Cover: adım 1, 3 resimden 3.

    • Place the SIM eject tool in the hole of the sim tray.

    • Push until part of the SIM tray is pushed out.

    • Pull out the rest of the SIM tray.

    Düzenle

  2. Samsung Galaxy A11 Vibration Motor Replacement: adım 2, 3 resimden 1. Samsung Galaxy A11 Vibration Motor Replacement: adım 2, 3 resimden 2. Samsung Galaxy A11 Vibration Motor Replacement: adım 2, 3 resimden 3.

    • Gently pry open the area of the back cover near the SIM tray using an iFixit opening pick.

    • Gently move the pick along the gap and pry open the clips holding it together.

    • If possible, use multiple picks to prevent the back cover from closing.

    Düzenle

  3. Samsung Galaxy A11 Vibration Motor Replacement: adım 3, 3 resimden 1. Samsung Galaxy A11 Vibration Motor Replacement: adım 3, 3 resimden 2. Samsung Galaxy A11 Vibration Motor Replacement: adım 3, 3 resimden 3.

    • Using a hair dryer on low heat, heat the fingerprint sensor in increments of 30 seconds to loosen the surrounding adhesive.

    • Gently push the fingerprint sensor until it detaches from the back cover.

    • If needed, remove the button by prying it from the bottom of the device.

    Düzenle

  4. Samsung Galaxy A11 Vibration Motor Replacement, Battery: adım 4, 3 resimden 1. Samsung Galaxy A11 Vibration Motor Replacement, Battery: adım 4, 3 resimden 2. Samsung Galaxy A11 Vibration Motor Replacement, Battery: adım 4, 3 resimden 3.

    • Remove the three 3 mm screws from the shield using a Phillips #000 screwdriver.

    • Remove the shield from the phone.

    Düzenle

  6. Samsung Galaxy A11 Vibration Motor Replacement: adım 5, 3 resimden 1. Samsung Galaxy A11 Vibration Motor Replacement: adım 5, 3 resimden 2. Samsung Galaxy A11 Vibration Motor Replacement: adım 5, 3 resimden 3.

    • Using tweezers, a spudger, or your fingers, disconnect the battery press connector from the phone.

    Düzenle

  7. Samsung Galaxy A11 Vibration Motor Replacement: adım 6, 3 resimden 1. Samsung Galaxy A11 Vibration Motor Replacement: adım 6, 3 resimden 2. Samsung Galaxy A11 Vibration Motor Replacement: adım 6, 3 resimden 3.

    • If needed, use a hairdryer on low heat to soften the adhesive under the battery.

    • Use an iFixit pry tool to dig under the battery edge.

    • If needed, use multiple pry tools to hold the battery in place.

    • Continue to cut the adhesive under the battery until you are able to pry the battery away from the phone.

    • Remove the battery from the phone.

    Düzenle

  8. Samsung Galaxy A11 Vibration Motor Replacement, Daughterboard: adım 7, 3 resimden 1. Samsung Galaxy A11 Vibration Motor Replacement, Daughterboard: adım 7, 3 resimden 2. Samsung Galaxy A11 Vibration Motor Replacement, Daughterboard: adım 7, 3 resimden 3.

    • Remove the eight silver and black 3 mm screws from the speaker cover using a Phillips #000 screwdriver.

    • Remove the speaker cover from the device.

    Düzenle

  9. Samsung Galaxy A11 Vibration Motor Replacement: adım 8, 3 resimden 1. Samsung Galaxy A11 Vibration Motor Replacement: adım 8, 3 resimden 2. Samsung Galaxy A11 Vibration Motor Replacement: adım 8, 3 resimden 3.

    • Using a spudger, disconnect the antenna heads from the daughterboard.

    • Disconnect the ribbon cable from the daughterboard.

    Düzenle

  10. Samsung Galaxy A11 Vibration Motor Replacement: adım 9, 3 resimden 1. Samsung Galaxy A11 Vibration Motor Replacement: adım 9, 3 resimden 2. Samsung Galaxy A11 Vibration Motor Replacement: adım 9, 3 resimden 3.

    • Using tweezers, gently pry the daughterboard from the device.

    • When using metal tools, it is important to be gentle in order to not damage the device.

    Düzenle

  11. Samsung Galaxy A11 Vibration Motor Replacement, Vibration Motor: adım 10, 2 resimden 1. Samsung Galaxy A11 Vibration Motor Replacement, Vibration Motor: adım 10, 2 resimden 2.

    • Using tweezers, remove the vibrator motor from the device.

    • If needed, you can apply heat to loosen the adhesive from the motor.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

Kristen Gismondi

Üyelik tarihi: 11/12/14

91.904 İtibar

241 adet Kılavuz yazıldı

Rozetler: 46

+43 tane daha rozet

Ekip

iFixit iFixit üyesi

Staff

118 Üyeler

19.425 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 6

Son 7 gün: 18

Son 30 gün: 25

Her zaman: 52