Samsung HMX-QF20 Lens Cover Replacement

Renee ve başka bir katkıda bulunan

En son October 29, 2020 tarihinde güncellendi

Tahmin yok

Orta

İşlem Görüntüleri

Eksik Adımlar

Eksik Ayrıntılar

Giriş

1. adıma git

Before replacing the lens cover, check to make sure the switch on the side is not temporarily stuck. If not and your lens cover is in need of replacement, follow this guide.

Neye ihtiyacın var

Aletler

Phillips #00 Screwdriver

Adım 1 Lens

Samsung HMX-QF20 Lens Cover Replacement, Lens: adım 1, 1 resimden 1.

Remove the 4 mm screw on the underside of the camcorder near the tripod mount.

Düzenle

Adım 2

Remove the 4 mm screw next to the buckle of the hand strap closest to the lens.

Düzenle

Adım 3

Open the LCD screen. Remove the 4 mm screw on the inside panel, located at top left corner.

Düzenle

Adım 4

Firmly grip and pull the front casing on the lens to remove it.
Be sure to remove the front casing at gently as possible to prevent damaging the attached ribbon cable. If not careful, the ribbon cables could be torn.

Düzenle