Tehlike
Tehlikeli Olma Potansiyeli Var
Bu talimat doğru şekilde uygulanmazsa yaralanma meydana gelebilir. Dikkatli olun ve tüm uyarıları takip edin.
Tehlike

Giriş

This guide will give user step by step instructions on how to replace the flash capacitor of the camera.

The first thing to do will be unscrew all the screws using Phillips #000 Screwdriver.
  • The first thing to do will be unscrew all the screws using Phillips #000 Screwdriver.

  • Keep all the screws in order. Black screws goes under the bottom of camera, and the silver screws goes on the sides and inside of the camera.

Yorum Ekle

Using the spudger, and plastic opening tool open the casing of camera.
  • Using the spudger, and plastic opening tool open the casing of camera.

Yorum Ekle

  • Once you open the camera case, you will be able to work on any part of the camera.

Yorum Ekle

  • Carefully take out the internal battery using spudger.

  • Capacitors can be very dangerous, so make sure to be careful!

Yorum Ekle

  • Disconnect the wire from battery and replace the old battery with new battery.

  • Connect the wires to new battery and put the battery back in terminal.

  • Connect the positive wire to the positive terminal of the battery and negative wire to the the negative terminal of the battery.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Sarmad Khan

Üyelik tarihi: 09-01-2015

525 İtibar

5 adet Kılavuz yazıldı

Takım

USF Tampa, Team 1-6, Tanski Winter 2015 USF Tampa, Team 1-6, Tanski Winter 2015 üyesi

USFT-TANSKI-W15S1G6

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 8

Her zaman: 756