Eşyalarını Tamir Et Topluluk Mağaza

Shark AI Ultra AV2511AE Base Filters Replacement

Giriş

This guide for the Shark AI Ultra AV2511AE will show the steps for replacing the base filters. This will help if there are any problems with filtering and transferring trash from the smart vacuum to the base. It is also recommended to remove these filters and clean them every couple of months.

  1. Shark AI Ultra AV2511AE Base Filters Replacement, Base Filters: adım 1, 3 resimden 1. Shark AI Ultra AV2511AE Base Filters Replacement, Base Filters: adım 1, 3 resimden 2. Shark AI Ultra AV2511AE Base Filters Replacement, Base Filters: adım 1, 3 resimden 3.

    • This step is for the post-filter on the vacuum base.

    • Remove the black cover on the post-filter located on the side of the base.

    • Pull the "DOWN" tab and remove the filter.

    Düzenle

  3. Shark AI Ultra AV2511AE Base Filters Replacement: adım 2, 3 resimden 1. Shark AI Ultra AV2511AE Base Filters Replacement: adım 2, 3 resimden 2. Shark AI Ultra AV2511AE Base Filters Replacement: adım 2, 3 resimden 3.

    • This step is for the pre-filter on the vacuum base.

    • Open the white cover on the pre-filter located on the top of the base.

    • Remove the filter.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Frankie Medina

Üyelik tarihi: 09/20/23

325 İtibar

3 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

Utah Tech University, Team 1-3, McMurrin Fall 2023 Utah Tech University, Team 1-3, McMurrin Fall 2023 üyesi

UTAHTECH-MCMURRIN-F23S1G3

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 6

Her zaman: 70